Ok, so this might seem weird, but hang with me on this. I have two sites, Indy and Lafayette that each have their own Asterisk server. They each have their own outside PRI line. They are also trunked internally via and IAX tunnel over a private fi..
Author : Ryan, Travis
I want to use corosync and installed it via ubuntu repository. I guess there is a version 1 and 2 of corosync. For some reason ./configure for Asterisk (13) isnt recognizing I have corosync installed. I cant enable the res_corosync module in menuselect…
I have servers setup in versions 11 and 13. Between two 11 servers, I had no issues sharing BLF, and assigning the hints on my Cisco 525G2 phones.Ive upgraded to 13 on one of these servers, and now cant share BLF. I get something like…[2017-07-15 22:35:..
Ok, so a few years ago, when 13 first came out, I was having a core dump (crash) issue with asterisk 13. I worked with Josh some and even used my Digium subscription for support. Never was able to get it fixed at that time so let it go. Well now I..
Hey all,I have a setup with two analog lines coming into and Asterisk 13 box with a TDM400P and it takes a lot of rings before asterisk takes over. Ive traced this same box on two different analog providers so it probably isnt a problem with them.I..
So if someone has their own hardware and infrastructure but wants a software (not FreePBX but perhaps similar) what options do we have? Would like to virtualize it and not stuck with any one virtualization technology.Discuss….
What is the best virtual server tech (and most stable, etc) to use for a asterisk virtual hosting environment?I have a client that wants to do virtual hosting of Asterisk (only SIP or IAX, no PRI, etc) and Im wondering if Xen or something else wo..
Is there any way to have a meeting request in Outlook allow someone to attach/setup a conference bridge, time, etc for Asterisk?Travis Ryan Director of Information Technologies Oscar Winski Company2407 North Ninth Street Lafayette, IN 47905ryant@oscarwinski.com(7..
I start asterisk 13.7.2 and it dies before I can rasterisk into it. Ive tried getting a coredump, but it doesnt coredump.I know there are a lot of errors in the log below, but most of those just say itll not load a module, and no big deal.When launch..
I am wondering what the best solution is for initiating a call from Outlook Contacts. I imagine something that would start the call from the outlook card (or similar) and then dial the users extension and the contacts phone number and place them i..