every bodyi have problem in receiving fax from e1 lines. this is my scenario:faxphone—-ericson pbx —e1—-asterisk—-sip—–zoiper-softphonewhen i send fax from zoiper, i can receive it successfully on the faxphone but when i send fax from faxpho..
Author : s m
Home » Articles posted by s m
everyone,i have question about fax detection on dahdi channels. does dahdi channels detect fax and pass it? if yes, does it detects both types of fax (g711pass through and T.38)? finally, how can i enable it on dahdi_channels? i set faxdetect=both..
everybodyi want to send fax via asterisk in pass through mode. everything is ok if enable fax detection in ooh323 and write fax extension in extensions.conf file. just one problem: delay. i have to wait 5 seconds in order to fax detection done. it..
every body,i have big problem to configure h323 trunk between cisco router and asterisk 11.13.1 which uses ooh323 module. any body knows if ooh323 module can work with cisco routers or not???? (in gateway mode, it is ok and register in cisco gatekee..
every body,i want to have h323 trunk between cisco 2800 and asterisk 11.13.1 with ooh323 module. i configured both side and have successful call from cisco to asterisk. but when call comes from asterisk to cisco, my phone rings but no audio is he..
everybody,i want to configure a sip trunk between my system which has asterisk 11.5.1and a cisco router. this is my scenario:Freepbx—–my system—–cisco-router—-Freepbxmy system acts like a router. if i set just one codec in dial-peers on ci..
everybody,i want to have authentication on RAS messages between gatekeeper and gateway. i have a cisco gatekeeper and an asterisk gateway. is it possible to have h235 on asterisk gateway in order to send authenticated RAS message to gatekeeper? if y..
alli want to have overlap dialing in asterisk.it works fine if i dont have! in my pattern. for examplepattern 07. works fine and i can call07122 by overlap dialing via it. but if i define 07! i cant call 07122because it doesnt wait to collect all dig..