we think that there is a mistake with the asterisk-11.18.0.patch. The file look likediff –git a/.version b/.version index c5df2aa..150754a 100644— a/.version+++ b/.version@@ -1 +1 @@-11.18.0-rc1\ No newline at end of file+11.18.0 \ No newline at ..
Author : Administrator TOOTAI
Home » Articles posted by Administrator TOOTAI (paged 5)
I setup a door open system with a basic DTMF card. The card is connected to an Sipura/Linksys 3102 FXS port and is powered by this port.My problem is that when I send a call with Dial() command, channel has to be answered before receiving DTMFs, w..
on previous versions of asterisk, extension h and H make us know who ended a call (caller or callee). In the last * versions, seems that only h extension is used, as stated here http://www.voip-info.org/wiki/view/Asterisk+standard+extensionsIn the l..
as stated in the documentation, its allowed to set FAXOPT(faxdetect)=yes/no to allow fax detection.Its done (see below) but still fax detection 🙁 Extension 300 is hylafax with iaxmodem.On the upper Asterisk gw its the same, despite the faxdetect ..
we have following setup:fax machines > PSTN -> GW SIP -> Asterisk -> Peer IAX (Elastix)Asterisk is 11.16 as well as Asterisk version of Elastix peer.When sending incoming fax calls to the Peer IAX -which receive them using hylafax- we want to tell ..
our gateway receive incoming calls from an outside gateway for multiple DIDs. For some of them we want fax detection, for other no. To do so, faxdetect is set to yes, but how to disable the fax detection for a specific incoming DID? For those DIDs,..
all,On an Elastix server with asterisk 11.13.0 I have no verbose logs despite the fact that its OK in CLI, eg verbose set to 3 in my caseLogger.conf[logfiles];; Format is filename and then levels of debugging to be included:;debug;notice;warning;error;verbos..
I would like to use AMD on outgoing calls using analog line. I tested with SPA3102 and cisco2811 as gw and asterisk 1.8.26.1 as well as 11.8.1 Other end is analog number behind another cisco/asterisk, also tested calling a mobile number with the s..
I have patch failure trying to apply asterisk-1.8.26.1-patch.gz I took a look in the patch and found those lines at the begining:— asterisk-1.8.16.0-summary.txt (…/1.8.16.0) (revision 410440)+++ asterisk-1.8.16.0-summary.txt (…/1.8.26.1) (revis..
I face a problem which look like the same as David with his thread Asterisk not receiving call from VPN address.I had an Asterisk (Elastix) working well in a VM (Debian Wheezy – KVM) having IP 192.168.111.14, my phone network is in the range 192.168.10..