3 thoughts on - Mail2Fax

• Hello, i try to setup asterisk with hylafax:

  the config is:

  egrep -v “(^#|^$)” /etc/hylafax/config.ttyIAX0

  CountryCode: 49
  AreaCode: xxx FAXNumber: +49xxxxxxxx LongDistancePrefix: 0
  InternationalPrefix: 00
  DialStringRules: etc/dialrules ServerTracing: 1
  SessionTracing: 11
  RecvFileMode: 0600
  LogFileMode: 0600
  DeviceMode: 0600
  RingsBeforeAnswer: 1
  SpeakerVolume: off GettyArgs: “-h %l dx_%s”
  LocalIdentifier: “example”
  TagLineFont: etc/lutRS18.pcf TagLineFormat: “From %%l|%c|Page %%P of %%T”
  MaxRecvPages: 25
  ModemType: Class1 # use this to supply a hint Class1Cmd: AT+FCLASS=1.0 # command to enter class 1.0
  Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before PPM
  Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before TCF
  Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before EOP
  Class1SwitchingCmd: AT+FRS=7 # command to stop and listen for silence Class1RecvAbortOK: 200 # wait 200ms for abort response Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC frames Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration

  cat /etc/iaxmodem/ttyIAX0

  device /dev/ttyIAX0
  owner uucp:uucp mode 660
  port 4570
  refresh 60
  server 127.0.0.1
  peername 591
  secret xxxx codec alaw cidname Fax cidnumber xxxxxxx nojitterbuffer

  cat /etc/asterisk/iax_additional.conf
  ;——————————————————————————–;
  ; Do NOT edit this file as it is auto-generated by FreePBX.
  ;
  ;——————————————————————————–;
  ; For information on adding additional paramaters to this file, please visit the ;
  ; FreePBX.org wiki page, or ask on IRC. This file was created by the new FreePBX ;
  ; BMO – Big Module Object. Any similarity in naming with BMO from Adventure Time ;
  ; is totally deliberate.
  ;
  ;——————————————————————————–;
  [591]
  deny=0.0.0.0/0.0.0.0
  disallow=all secret=xxxx transfer=yes context=from-internal host=dynamic type=friend port=4570
  qualify=yes allow=alaw dial=IAX2/591
  accountcode=
  permit=0.0.0.0/0.0.0.0
  requirecalltoken=no secret_origional=xxxx callerid=Hylafax <591>
  setvar=REALCALLERIDNUM=

  Asterisk log show only

  [19-06-2020 10:18:46] VERBOSE[3245] chan_iax2.c: Tx-Frame Retry[000] —
  OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE
  [19-06-2020 10:18:46] VERBOSE[3245] chan_iax2.c: Timestamp: 00014ms SCall: 01337 DCall: 00000 127.0.0.1:4570
  [19-06-2020 10:18:46] VERBOSE[3245] chan_iax2.c:
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: Rx-Frame Retry[ No] —
  OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: Timestamp: 00014ms SCall: 20234 DCall: 01337 127.0.0.1:4570
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: Rx-Frame Retry[ No] —
  OSeqno: 000 ISeqno: 001 Type: IAX Subclass: PONG
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: Timestamp: 00014ms SCall: 20234 DCall: 01337 127.0.0.1:4570
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: RR_JITTER : 0
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: RR_LOSS : 0
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: RR_PKTS : 1
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: RR_DELAY : 40
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: RR_DROPPED : 0
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: RR_OUTOFORDER : 0
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c:
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: Tx-Frame Retry[-01] —
  OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
  [19-06-2020 10:18:46] VERBOSE[3251] chan_iax2.c: Timestamp: 00014ms SCall: 01337 DCall: 20234 127.0.0.1:4570

  Fax is not send. No Sip stuff is show in log. I don’t know what is wrong here. Best regards

  —

• Basti,

  This really belongs on the iaxmodem mailing list or the HylaFAX+ Mailing list.  Lee Howard is the author of both packages and very responsive.

  Doug

• I don’t know if it’s newer, but I use “sendfax”

  —