T1 -Asterisk Server – Analog Lines
Hello All,
The problem I’m facing is the following: two machines that require analog signal. However, connection to the world is setup as follow: T1 connection to Asterisk server
Any suggestions on how to convert digital signal to analog?
Type of card on my Asterisk server is wct4xxp
Thanks for your support!
Motty
3 thoughts on - T1 -Asterisk Server – Analog Lines
I do this with an ADIT 600 channel bank that I got off of ebaY many years ago. A quick search shows one for around $98
http://www.ebay.com/itm/like/191565965269?lpid
Thanks for your suggestion! After some research I purchased the AdTran Total Access 904 2nd. We have a T1 connection to our Asterisk server and from my Asterisk server to AdTran. I am in dead in the water, I can
The link below is geared towards the ADIT, but I am assuming you have the AdTran configured properly and am only looking for the Asterisk portion of the config
Doug
http://www.voip-info.org/boards/index.php?t=8143
—