Chan Dongle AT^DDSETEX Failed
Hi to everybody
I have a Huawei E160E but it not works in my chan dongle, see the log
== Using SIP RTP CoS mark 5
— Executing [951729377@ramais:1] Dial(“SIP/2002-00000000”,
“Dongle/dongle0/951729377,60,tT”) in new stack
— Called Dongle/dongle0/9XXXXXXXX
[Jun 1 18:24:40] ERROR[5707]: at_response.c:467 at_response_error:
[dongle0] Dial failed
— Dongle/dongle0-0100000000 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
— Auto fallthrough, channel ‘SIP/2002-00000000’ status is ‘CONGESTION’
[Jun 1 18:24:40] ERROR[5707]: at_response.c:472 at_response_error:
[dongle0] AT^DDSETEX failed
It is problem of unlock my mondem or it is the problem of my Asterisk?
2 thoughts on - Chan Dongle AT^DDSETEX Failed
Have I to fallow this tutorial?
http://www.ruchirablog.com/unlock-voice-huawei-hspa/
2016-06-01 18:30 GMT-03:00, Vitor Mazuco:
Make sure PIN is disabled and VOICE is activated on your Huawei. Make sure the firmware of your Huawei supports VOICE. In case it does not support VOICE, you can flash it with another firmware.
Take a look here:
http://phil.lavin.me.uk/2016/04/enabling-voice-on-a-huawei-e160-atddsetex-failed/
Have fun!
Frank