Timedout While Waiting ‘OK’ In Response To ‘AT’

Home » Asterisk Users » Timedout While Waiting ‘OK’ In Response To ‘AT’
Asterisk Users 10 Comments

Hi!

I’m trying to use dongle in my Asterisk

But appear for me all time this error

[Feb 12 13:49:10] ERROR[13347]: chan_dongle.c:442 do_monitor_phone:
[dongle0] timedout while waiting ‘OK’ in response to ‘AT’
— [dongle0] Error initializing Dongle
— [dongle0] Dongle has disconnected
— [dongle0] Trying to connect on /dev/ttyUSB1…
— [dongle0] Dongle has connected, initializing…
[Feb 12 13:49:25] ERROR[13348]: chan_dongle.c:442 do_monitor_phone:
[dongle0] timedout while waiting ‘OK’ in response to ‘AT’
— [dongle0] Error initializing Dongle
— [dongle0] Dongle has disconnected

In dongle.conf I use

[dongle0]
audio=/dev/ttyUSB1
data=/dev/ttyUSB2

Somebody already uses this software?

Thanks in advanced.

10 thoughts on - Timedout While Waiting ‘OK’ In Response To ‘AT’

  • Yes, I used IMEI.

    But in CLI appearing nothing and it not register.

    2016-02-12 14:27 GMT-02:00, Shabbir abbasi :

  • have changed this
    [dongle0]
    audio=/dev/ttyUSB1
    data=/dev/ttyUSB2

    To

    [dongle0]
    imei3456789012345

    and imei exact same as on your device ?

  • Yes I used.

    The problem can be the version of Asterisk?

    I use Asterisk 13 instead of 11.

    2016-02-12 14:31 GMT-02:00, Shabbir abbasi :

  • Right,

    I’ll use in Asterisk 11 and I reply for you.

    Thanks,

    2016-02-12 14:35 GMT-02:00, Shabbir abbasi :

  • I tried this

    [dongle0]
    ;audio=/dev/ttyUSB1 ; tty port for audio connection;
    no default value
    ;data=/dev/ttyUSB2 ; tty port for AT commands;
    no default value

    ; or you can omit both audio and data together and use imei3456789012345 and/or imsi3456789012345
    ; imei and imsi must contain exactly 15 digits !
    ; imei/imsi discovery is available on Linux only imei52098043831724
    ;imsi3456789012345

    My imei is 352098043831724

    But nothing change.

    2016-02-12 15:12 GMT-02:00, Frank :

  • I think that my monden is locked for Voice

    I use a Huawei E173, someone know how can I unlock it?

    Is necessary to upgrade the firmware?

    2016-02-12 15:39 GMT-02:00, Vitor Mazuco :