Problem With Cisco CUBE When Dialling Into Asterisk 13 Server
Hello,
This is a problem with my Cisco CUBE (2811), so apologies for this being kind of off-topic. It is acting as a border for my Asterisk 13 server though 🙂
Rather than re-type the details of my problems, I have a post in the Cisco community with running-configs and various debugs attached. I’m drawing blanks as to my problem so I am reaching out wherever I can to try resolve this.
https://supportforums.cisco.com/discussion/12589596/cisco-ube-hangs-calls-immediately-after-being-answered
Thanks in advance,
Brendan Ord OntheNet – Network Engineer P 07 5553 9222
F 07 5593 3557
Level One, 165 Varsity Parade Varsity Lakes Qld 4227 (Map
www.OntheNet.com.au
One thought on - Problem With Cisco CUBE When Dialling Into Asterisk 13 Server
I’m not sure anyone on here is going to be able to help you, unless they are intimately familiar with Cisco CUBE as well. Looking at the post you referenced, where 172.22.4.8 is Asterisk, you have the following call flow:
U 172.22.4.12:59803 -> 172.22.4.8:5061
INVITE sip:61756767463@172.22.4.8:5061 SIP/2.0.
U 172.22.4.8:5061 -> 172.22.4.12:5060
SIP/2.0 100 Trying.
U 172.22.4.8:5061 -> 172.22.4.12:5060
SIP/2.0 180 Ringing.
U 172.22.4.8:5061 -> 172.22.4.12:5060
SIP/2.0 180 Ringing.
### Pick up handset to answer U 172.22.4.8:5061 -> 172.22.4.12:5060
SIP/2.0 200 OK.
U 172.22.4.12:59803 -> 172.22.4.8:5061
BYE sip:61756767463@172.22.4.8:5061 SIP/2.0.
U 172.22.4.8:5061 -> 172.22.4.12:5060
SIP/2.0 200 OK.
If 172.22.4.12 – which I assume is the Cisco phone or CUBE – has decided to send Asterisk a BYE, there’s not much anyone can tell you unless they are familiar with that device. Asterisk is being told to hang up the call, and so it will do so.
—
Matthew Jordan Digium, Inc. | Director of Technology
445 Jan Davis Drive NW – Huntsville, AL 35806 – USA
Check us out at: http://digium.com & http://asterisk.org
—