Archives : July-2015
Im using Asterisk 1.8.11.0 – is there any way to apply (for example) a bandpass filter to Asterisk RTP audio in the realtime audio stream?Im looking for a way to (for example) filter out a 50Hz AC hum present in some calls I push through my asterisk.Th..
, 2 weks ago I asked questions about PJSIP and T.38 but got no replies. I upgraded Asterisk to git as of yesterday (309dd2a), and Im still having the same issues. In the trace below, Im sending a fax from Hylafax server through iaxmodem on Asterisk..
HiI have a dialplan that search a phone from dialed code, i.e:mysql table:code:1234dest: +555133449966query in odbc function:SELECT dest FROM my_table WHERE code = ${ARG1}dialplan:exten => _#7XXXX,1,Set(DESTNO=${ODBC_query_dest_in_table(${EXTEN:2})})sam..
Im trying to get Asterisk 1.8.11.0 to start automatically when my CentOS6.5 box boots.Ive done this many times before, but for some reason, on this box and hardware (older Core i3 system, 4GB RAM) I cannot get Asterisk to be contactible after boot..
,Ive been googling this issue and found some good resources however I am still running into problems with the following combo … Heres my story;-Asterisk 13.4 with FreePBX 12.-Migrating from Asterisk 11 / FreePBX 2.11-Mix of Cisco 79xx handsets, mos..
I have a queue configured on Asterisk (11.14.2);Currently regardless of what codec any side is using, every call handled by the queue is seen as 2 separate calls (4 channels).Calls are incoming to the queue from a (few) SIP trunk(s), queue has the qu..
every two weeks the asterisk process has a segfault. Any idea whats reason or what I can do… thankspc kernel: [1780743.239296] asterisk[11362]: segfault at 0 ip (null) sp 00007f1e396b04a8 error 14version is debian jessie Asterisk 11.13.1~dfsg-2..
Hi!I am running an Asterisk PBX 11.6-cert10 with about 20 SIP phones and recently one of the phones (Snom 720) always returns 486 Busy Here when calling anonymously. Its only a single phone, the rest works as expected. I checked the phones settings ..
every bodyi have problem in receiving fax from e1 lines. this is my scenario:faxphone—-ericson pbx —e1—-asterisk—-sip—–zoiper-softphonewhen i send fax from zoiper, i can receive it successfully on the faxphone but when i send fax from faxpho..
The Linksys Cisco SPA Compatible Jabra BIZ 1925 Direct Connect Stereo Headset Bundle with 2.5mm Telephone Interface cable delivers enhanced performance and exceptional value for offices, help desks and home offices. Its the cost-effective noise-cancel..