MixMonitor With B Option Recording All Calls

Home » Asterisk Users » MixMonitor With B Option Recording All Calls
Asterisk Users 4 Comments

Hello I have an issue wit MixMonitor. I need to record only answered calls, so I set “b” option for this but calls still recording even call no answered My asterisk version 12.5.1, at my other servers with older versions of asterisk (11.8 for example) MixMonitor works fine.

4 thoughts on - MixMonitor With B Option Recording All Calls

  • What technology are you using for your outgoing calls? SIP trunk, IAX trunk, ISDN, mobile or analogue phone lines?

  • **** THIS IS NOT WHERE YOUR REPLY BELONGS ****

    Well, SIP certainly allows for full supervisory information (analogue doesn’t, and all calls are deemed answered if the exchange line was available). What have you got in your sip.conf ? And what does your SIP
    trunk provider have to say on the matter? (It wouldn’t be totally unknown for a dodgy telco to provide not-entirely-truthful supe.)

  • my sip.conf
    [kamailio_ext1]
    type=friend host = my.superprovider.com port = 5068
    canreinvite = no insecure = invite,port transport=udp trustrpid=yes context = incoming videosupport=no directmedia=no dtlsenable = no tlsenable=no disallow=all allow=alaw allow=opus allow=ulaw

    connection goes great. SIP session have all packets

    So astersik send INVITE -> to trunk then
    <- TRYING <- RINGING <- OK ->ACK

    and at the end some of callers send BYE

    And then Goes OK and ACK

    full SIP session. Signaling is Ok. At CDR I see ANSWERED

    Wheb Call Unanswered I see

    INVITE -> to trunk then
    <- TRYING <- RINGING some of callers CANCEL OK ACK So There is full session too At CDR I see No Answered session (that is write) And after that I see empty record file 2014-09-22 18:40 GMT+04:00 A J Stiles :