Archives : February-2014
Im using asterisk 1.8 as an answering machine. Id like to hear the calls it answers aloud in case I want to pick up and interrupt the call.There are a few articles describing, for example, three-way calling a monitor phone set to auto-answer, but I coul..
We have a customer reporting poor quality calls when they come to us via a particular provider. The SIP traces look perfectly normal both on the ingress to us and egress to another telco. No additional sip messages after the call has been answered un..
Dear Folks,Im not able hearing the voice of client but on other hand client able to hearing my voice.Im not able to find out the problem where is im wrong.Im getting continues following error:chan_sip.c:10391 check_via: is not a valid hostConfigurat..
Which is the best way around to integrate Asterisk with VoiceXML like VoiceGlue…! Am using Asterisk 11.2…
Dear Folks,whenever Im executing following command :dahdi_cfg -vvvI got following error:DAHDI_SPANCONFIG failed on span 1: No such device or address (6)Regard..
If SIP channel driver needs to connect to a remote GW over a dedicated SIP trunk BUT the remote GW has a standby in case of failure, how can the sip configuration file be configured for the remote GW when there are actually two IP addresses. If the m..
list,i have asterisk 1.4.43 installed and i want to configure the auto-answerexten => 506,1,SIPAddHeader(Call-Info:\; answer-after=0)exten => 506,n,Dial(SIP/105)when i call the 506 the SIP/105 still ringing, i have snom320 and i have set the Auto Ans..
, I have asterisk 1.8.5 installed on CentOS 6. Now I want to configure my PBX to work in my network. I see that I can do this with asterisk files or use database like mysql to do it (realtime)I want to know what is the best way and what can be conseque..
all, I want to two sip clients connect through Asterisk in local network for testing. My sip.conf file looks like this [general]context=internal allowguest=no allowoverlap=no bindportP60bindaddr=0.0.0.0srvlookup=no disallow=all allow=ulaw alwaysauthreject=..
im using a Asterisk Server which is not behind NAT. First i had problems with the fax detection. But this is now solved after adding a wait(2) at the correct place. But im still unable to receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: ..