I have a site with Polycom handsets on all the desks, mostly IP650s, some IP550s, and some IP450s as well.I need to update the firmware on the IP450s. However, the firmware simply wont load.The latest firmware (4.0.3 Rev F) supports all phones at t..
If you are using Grandstream GXP 21XXX and 14XX phones and you are doing any kind of remote firmware updates or config updates DO NOT use the 22.214.171.124 BETA version.We have found a bug in it that causes HTTP updates to not work if you are using a dom..
I just moved many Polycom phones from firmware v3 to 4.0.1b.Anto-Answer simply stopped functioning. I can downgrade and make it work, upgrading kills it again. There obviously is a difference in how the newer firmware is treating this auto answer ..
On Sat, Jan 7, 2012 at 5:19 AM, Luke Hamburgwrote: > Doug: > for what its worth I am having the exact same nightmare.Not sure exactly > when it started but I believe it was a change in 126.96.36.199 / 188.8.131.52-rc1 (I > am > running 1.8.9rc1).I also have Poly..
all, Ive got a customer with 10 Polycom 335s and the latest(ish) firmware.For the most part, things are working well. However, about once a day, a given phone will just reboot.They dont do it all at once, and they dont do it along any pattern tha..
I am still having major issues with dtmf recognition. My setup is Polycom end points. Tried this with different models, firmware and cfgs. Outbound calls are not going out reliably. Phones are set to rfc2833. I have had sangoma and elastix support l..
I am dtmf recognition issues. Out bound calls go though dahdi trunk/sangoma a400. Dtmf tones are not being recognized. Is there any issues with the latest polycom firmware?
Sent from my android ..
Dears; The Cisco 7942 worked in SIP and did not work in skinny firmware (in skinny, it register but no voice can be heared). But now when we need to dial any number from the Cisco IP Phone 7942, it gives busy (the phone send the call for the aster..
All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only h..