How to set BRI-to-BRI trunk using 2 HA8+B400M cards

Home » Asterisk Users » How to set BRI-to-BRI trunk using 2 HA8+B400M cards
Asterisk Users No Comments

> The link between the Asterisk boxes must not be terminated on both
> ends. Termination resistors on both ends is practically guaranteed
> to cause link issues.
>
>
> Very interesting but I’m afraid I still don’t get it.
>
> For various reasons, my goal is build an asterisk + patton solution
> that will be later plugged into 8 BRIs like this (hoping my ASCII art
> will work) :
>
> Patton ———— x4 BRI —————-PSTN
> | |
> | |
> Asterisk1 ——– x4 BRI——————–

Connections like this?
Patton —— x4 BRI — PSTN
Asterisk1 — x4 BRI — PSTN
Asterisk1 — BRI?? —- Patton
(Cross link between Asterisk1 and Patton (Beware of potential clock loop))

>
> The box Asterisk2 ast I referred to it previously, is here to behave
> as the PSTN.
> As a consequence, I tought that :
> 1. I should set each Asterisk2 port as NT/PTP.

The NT/PTP port should not have termination resistors enabled.

Richard