PRI issue its BUSY

Home » Asterisk Users » PRI issue its BUSY
Asterisk Users 3 Comments

Hi all,

I just configures my PRI and incoming calls are working fine but outside calling giving error PRI is BUSY 🙁 any idea ? I have same setup on other box and that boxes works perfect.

3 thoughts on - PRI issue its BUSY

  • Thanks!

    but we have only one PRI and single T1 port 🙁

    asterisk-users-bounces@lists.digium.com
    [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of satish patel

    Sent: Monday, June 06, 2011 8:20
    PM

    issue its BUSY

    Hi all,

    I just configures my PRI and incoming calls are working fine but outside
    calling giving error PRI is BUSY 🙁 any idea ? I have same setup on
    other box and that boxes works perfect.

  • This is wired..

    If i connect my old asterisk 1.2 box my PRI working great! all inbound outbound calls.. But its not working with asterisk 1.8 🙁 ( i can call in but not out)

    sometime i am getting Span 1: Channel 0/23 got hangup request, cause 16 but my call doesn’t get completed

    == Primary D-Channel on span 1 up

  • Solution:
    pridialplan=unknow

    This is wired..

    If i connect my old asterisk 1.2 box my PRI working great! all inbound outbound calls.. But its not working with asterisk 1.8 🙁 ( i can call in but not out)

    sometime i am getting Span 1: Channel 0/23 got hangup request, cause 16 but my call doesn’t get completed

    == Primary D-Channel on span 1 up