Quintum AFT800 on Asterisk 1.4.29

Home » Asterisk Users » Quintum AFT800 on Asterisk 1.4.29
Asterisk Users 3 Comments

Hi All,

Is it possible to use Quintum AFT800 on Asterisk 1.4.29 as Trunk for Analog
(like Digium Analog Card) ?

And if it’s possible, could any one please give me the reference how to
configure it on Asterisk 1.4.29.

Thanks

Regards,

Zoel Hairi

3 thoughts on - Quintum AFT800 on Asterisk 1.4.29

  • All,

    This case solved.

    Thanks . J

    Regards,

    Zoel Hairi

    Sent: Monday, November 22, 2010 12:07 PM

    Hi All,

    Is it possible to use Quintum AFT800 on Asterisk 1.4.29 as Trunk for Analog
    (like Digium Analog Card) ?

    And if it’s possible, could any one please give me the reference how to
    configure it on Asterisk 1.4.29.

    Thanks

    Regards,

    Zoel Hairi

  • Hi Seighalani,

    Sorry for the late reply.

    We used the SIP Trunk Concept, so we create a SIP Trunk to communicate with the Quintum AFT800. Here’s the detail :

    On sip.conf

    [9999]

    context=from-internal

    secret=9999

    type=user

    username=9999

    fromuser=9999

    qualify=no

    [QUINTUM]

    context=

    host=

    insecure=port,invite

    nat=yes

    secret=9999

    type=peer

    username=9999

    context=from-trunk

    and on Quintum we used default setting from the Tenor Configuration Manager except for these steps :

    – Create SIP User : 9999 with secret 9999

    – Gateway Selection : use SIP

    That’s what I do with my config.

    Thanks

    ZH

    href=”mailto:asterisk-users-bounces@lists.digium.com”>asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of alireza sadeh seighalan
    Sent: Saturday, December 04, 2010 2:40 AM

    hi Zoel

    would you tell us how do that?

    good luck
    seighalani

    All,

    This case solved.

    Thanks … J

    Regards,

    Zoel Hairi

    Sent: Monday, November 22, 2010 12:07 PM

    Hi All,

    Is it possible to use Quintum AFT800 on Asterisk 1.4.29 as Trunk for Analog (like Digium Analog Card) ?

    And if it’s possible, could any one please give me the reference how to configure it on Asterisk 1.4.29.

    Thanks

    Regards,

    Zoel Hairi