This was supposed to go to the list.

I am now thoroughly confused.

In the [voipms] stanza where endpoint is defined (type=endpoint), everything points to voipms. But in the [yealink] stanzas, I tried pointing everything to Steve, one item at a time, then both of them, and nothing changed.

block quote Am Tue, May 23, 2023 at 07:22:22PM -0400 schrieb Steve Matzura:

block quote
1. Still can’t register my phone The username and password are correct. I don’t know what else to try. block quote end You can start a sip trace from the asterisk console. REGISTER
sip:192.168.1.185:5060
 SIP/2.0
block quote end block quote end
…. block quote block quote Authorization: Digest username=”Steve”, realm=”asterisk”,
[May 24 09:26:13] NOTICE[47903]: res_pjsip/pjsip_distributor.c:676
log_failed_request:
Request ‘REGISTER’ from …..’  – No matching endpoint found block quote end block quote end In the endpoint section there is a parameter identify_by (default:
“username,ip”). “username” means, the the from-user is used.

Use “yealink” or “Steve” for both user names. Using different names for a phone make it just more complicated. You might have to change the phone configuration.

block quote
[yealink]
type = aor contact =
sip:Steve@192.168.1.185
block quote end There should be no “contact” parameter for a phone. The phone sends the required information with the register request.

block quote end

—