I am trying to do an install of asterisk by source… dahdi 2.11.1, asterisk 11.22.0 libpri-1.5.0 on CentOS 6.7
(not my first time doing so, but this is a remote system someone else setup)

All installed well, compiled fine but when I run asterisk it is not recognizing the card.

output log gives me:
dahdi_open: Unable to specify channel 1: No such device or address

lsmod | grep dahdi shows dahdi_voicebus 53074 1 wctdm24xxp dahdi 224394 2 wctdm24xxp,dahdi_voicebus crc_ccitt 1717 2 wctdm24xxp,dahdi

which looks correct.

dahdi_hardware -v pci:0000:04:00.0 wctdm24xxp+ d161:0800 Wildcard TDM800P

dahdi_scan
[1]
active=yes alarms=OK
description=Wildcard TDM800P
name=WCTDM/0
manufacturer=Digium devicetype=Wildcard TDM800P
location=PCI Bus 04 Slot 01
basechan=1
totchans=8
irq=0
type=analog port=1,FXO
port=2,FXO
port=3,FXO
port=4,FXO
port=5,none port=6,none port=7,none port=8,none

So I think dahdi looks good…

I have asterisk configured with more /etc/asterisk/chan_dahdi.conf
[channels]

pridialplan=unknown prilocaldialplan=unknown

signalling=fxs_ks relaxdtmf=yes context=smvoice-incoming group=1
channel => 1-8

All these packages are installed: yum install -y make wget openssl-devel ncurses-devel newt-devel libxml2-devel kernel-devel gcc gcc-c++ sqlite-devel libuuid-devel

What next step(s) do I need to get asterisk happy?
Thanks,

jerry