Archives : March-2015
Home » 2015 (paged 60)
Hey i have an interesting topic to discuss here. The main goal here is to be able to make a video call between two WebRTC endpoints registered on asterisk 13 it is a feature that definitely asterisk 13 should support . the problems that i faced w..
list!I’m working on a fresh Asterisk install over CentOS7 base. I’m using “Asterisk. The Definite guide” book as a reference. I connect and work using SSHProblem I have – I can’t connect to asterisk from remote. Getting error:$ sudo aster..
I am trying to force a registration and unregistration with my SIP trunks, but I see pjsip send unregister, but no register.I.e., I am looking for pjsip send register.Is there any such command? If so, why do I not see it in my CLI?Should I upgrade..
List, I need your advise please. I am trying to establish a call from Asterisk 1.8.15-cert5 to one remote SIPUA (not Asterisk), both are behind NAT. That remote peer is configured with nat=yes in my sip.conf but yet RTP packets are being sent to ..
everyone, I configured a queue with dynamic agents for a small proyect, normally only 1 member in the queue for ansering calls would be enough. But I need to configure a ringtone or any other signal to comunicate to the members queue other call ca..
listi have an issue related to outbound calls i can contact all the number except on number given by our provider in trunkthe issue just when i configure my trunk in our server but when i configure the trunk directly in x-lite i can contact this num..
I wasnt able to get much out of babytel, beyond the fact that I was, apparently, sending options which is why Im not getting 200 OK.How can I, generally speaking, ping/telnet or otherwise test the connection to get more data?A connection to this p..
Is it possible to log the raw signaling of Dahdi channels to a..
list,Im hoping that you could read through this mail and give me some tips on how to improve my setup (functionality, security, really anything). Its my first Asterisk installation and meant for simple home use.I installed Asterisk 11 on an OpenWrt Barr..
All;Im running Asterisk 11.6-cert9 and am trying to play a pre-recorded audio file to extensions using the Page() command. The dial plan looks like this: exten => s,n,Page(${AVAILCHANS},A(${AUDIOMSG})) and the paging by itself works great. However, w..