Archives : February-2014
Home » 2014 (paged 46)
I have an Asterisk box with a public IP address and two SIP clients behind the same NAT device(I also have SIP clients behind different NATs). I want to know is it possible for Asterisk to detect if both clients are behind the same NAT and use dir..
Everyone.Our environment is a register free setup, and our phones are set as host=dynamic. The problem we are experiencing is for inbound calls:Name/username HostDyn Forcerport ACL Port Status Realtime222/222(Unspecified)D N A0Unmonitored Cached R..
All,Im on a middle of an asterisk installation/configuration for my company and Im testing the TLS configuration. For this reason, I used the ast_tls_cert script to build the ssl certificates for my server.On sip.conf file:tlsenable=yes tlsbindaddr=0.0.0.0tlscertfile=/etc/asterisk/keys/asterisk…
Everyone,Our switch is sending P-Asserted info to asterisk however the information is getting removed when asterisk forks the call. Is it possible to have asterisk retain the P-Asserted on the leg. This is quite important for valid functionality of ..
I have a confbridge in asterisk 11. I am using an AGI to bring people in the conf automatically.I want to speak a pre-recorded wave file message into the conf to all users.how might I do that?Th..
I inherited an Asterix phone system. I am well versed in Windows based platforms but have zero experience in Linux and Asterix, no make matters worse I have no documentation on this system. I had to change the entire networks gateway address for vari..
I have a customer with a more or less unique need.Right now we are using Wombat as a dialer software so they can contact clients for QA purposes.Everything is working very well and their contact center productivity is way up from the old manual dial..
I believe I am running an AGI (to put users in a conf) before the confbridge is built. So the users are not really get in the conf…exten X,1,run agi to put users in conf exten X,n,ConfBridge()How do I have in the dial plan ConfBridge() and somepl..
All,Lets say I want to setup a queue that will handle inbound calls to dynamically added agents that are all mobile numbers. Now when I do this setup it works, it loads the agents dynamically and if the mobile phone is on and have reception it wor..
Greetings-I recently experienced an odd situation. I have an Asterisk 11.5.0 system (Box A) with a SIP peering to another Asterisk 1.8.23.0 system (Box B). At some point, Box A started sending over 65Mbps of SIP OPTIONS packets to Box A. I do have qualify=..