I have not found a solution so I am checking with the Masses here. I have a client who has a old 5 line key system without voicemail. Currently, I can set up a huntgroup and ring each line for 15 seconds and after the 5th line has reached its lim..
I understand why do I get call twice to my mobile when I execute the following AMI command sets: ACTION: Originate Channel: Local/800@test Timeout: 60000 Priority: 1 and my dialplan look like this: [test] exten => 800,1,DIAL(SIP/447xxxxxx@voip); ex..
I am investigating an issue with IAX2 extensions in Asterisk 1.8.x. My application connects to Asterisk via AMI and attempts to run an Originate command between an extension (such as SIP/5555 or IAX2/8888) and an application (in my case it is AgentLogi..
On 11/20/2011 02:49 PM, Matt Hamilton wrote: > > > 2. if the devices/members in the queue are not reachable, I would like > to forward him to a phone B. > Im looking for a fast/practical way of accomplishing the second one. > In other words, before send..
all, Ive got a bunch of Polycom 301s at a site that sits behind a Sonicwall firewall. What Im seeing is that the phones are constantly becoming unavailable, followed shortly by becoming available again. The phones register just fine and sound great..
Im kind of at a loss to diagnose problems like this, yet we get them a lot. – The ATA (Thomson 784 in this particular case) is logged into the Asterisk server. sip show peer shows their IP address, port, and useragent. – The ATA is connected direc..
all, Heres the syntax of the Swift command from voip-info: Swift([^]the text to speak[||]) Since the Swift application (inexplicably) doesnt support support escape digits directly, Im setting timeout to 1 and max digits to 1 so that pressing any ..
1-Check signaling type on gateway PSTN ports 2-Set RTP timeout in SIP trunk. From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of Mike Sent: Friday, March 04, 2011 7:46 PM To: Asterisk Users Mail..
I want to avoid sending calls to a queue when it is full. From the fact that maxlen must be at least 1 (I wish it could be zero but it isnt) Id like to know if theres a way to do it. Setting the Queue() timeout to a little value is not the most suita..