In order solve my incoming caller ID problem, I upgrade the dahdi to version 2.6.1 from version 2.4.x. After upgrade, I found the echo cancellation doesnt working (Im using Digium AEX800B PCI Express card). I can hear my self talking on the phone. ..
all, Ive tried to explicitly set my two PSTN trunks/FXO lines to alaw with: alaw = 1-2 in /etc/dahdi/system.conf. However, when I do this, all I get is loud intense noise on the line and nothing else – cant dial, cant make calls, cant receive cal..
Helo, I am upgrading a linux box ( Slackware + asterisk 1.0 + zaptel 0.9 ) to new asterisk 1.8 + dahdi. – In old softwares versions the box is working well. – After upgrade to slackware 13.37 + dahdi ( 2.3.X to SVN ) + asterisk , before asterisk is loa..
, I know this is more a Digium hardware than an Asterisk issue. Already posted a question at Digium, however also like to see whether anyone in the Asterisk community has encountered the following situation: I installed a Digium B410P BRI PCI card..
Testing 188.8.131.52 (with Dahdi 184.108.40.206 and asterisk-gui 2.1.0-rc1), Im seeing this on my console: WARNING: config.c:1208 process_text_line: Unknown directive # at line 1 of /etc/asterisk/../dahdi/system.conf This warning is repeated for every l..
i need to know how can i configure a D 300JCT with asterisk, i want to connect two PBX where each one have this card on it,i really need your help as soon as possible. i already done some file configuration system.conf and in chan_dahdi.conf and i h..
Dear; We are using ISDN PRI, and the telephony card is Digium card supported 2 ports of E1s, and in the system.conf, I selected the zone to be uk loadzone = uk (loadzone = uk and defaultzone=uk). Actually the Asterisk in Jordan and connected to Jor..
I have 2 servers with a TDM400 card, port 1 populated by an FXO (red) module), port 4 populated with an FXS module. I am using dahdi linux and tools 220.127.116.11. The servers are running CentOS 4 and the other box CentOS 6. Both modules have been work..
Stephen H. Gerstacker wrote: > so any help would be appreciated You could start by supplying snippets of your config for the PRI. Telling us what PRI card youre using. For example, my dahdi config for my PRI: cd /etc/dahdi cat system.conf span=1,1,0,esf,b..
On Tue, Aug 16, 2011 at 10:48 AM, Shaun Ruffellwrote: > On Tue, Aug 16, 2011 at 10:31:54AM -0400, Eric Merkel wrote: >> I am having a problem with a new PRI turn-up on dahdi 2.5.0 and >> asterisk 1.8.5 that I have not seen before. The PRI is setup..