The Asterisk Development Team has announced the releases of:DAHDI-Linux-v2.9.0-rc1DAHDI-Tools-v2.9.0-rc1dahdi-linux-complete-2.9.0-rc1+2.9.0-rc1This release is available for immediate download at:http://downloads.asterisk.org/pub/telephony/dahdi-li..
Hello!Just got new server with TE420. Not all four spans will be used immediately, but spans not configured or not connected blink red light. Is it possible to turn span off, so my colleagues will not eventally tell me that something is wrong with asteri..
listi have an issue with my dahdi_channels.confin span 1 when i use it like below i can do my outband calls without issue; Span 1: TE2/0/1 T2XXP (PCI) Card 0 Span 1 (MASTER)group=0,11context=from-pstn switchtype = euroisdn signalling = pri_cpe chan..
If I put two spans worth of channels, say 1-23 from span 1 and 25-47 in span 2, in one group, but only span 2 was showing OK and the other was down / showing a RED alarm, would asterisk automatically skip over trying to use channels 1-23 when doing outbo..
In a machine Ive got :CLI> pri set debug off No such command pri set debug off (type core show help pri set for other possible commands)CLI> core show help pripri intense debug span pri service disable channel Remove a channel from servicepri serv..
In my lab, Im testing BRI spans in NT/ptmp mode. My setup is:asterisk 11.2.1libpri 1.4.14dahdi 2.6.1wctdm24xxp (HA8 hybrid with B400M)SIP phoneAsterisk with HA8Patton SN4638Asterisk SIP phoneThe single BRI line Im testing remains down:CLI> pri show sp..
I have a B410P card with span ports set up as span=3,1,0,CCS,AMIspan=4,2,0,CCS,AMIspan=5,3,0,CCS,AMIsignalling = bri_cpe switchtype = euroisdn layer1_presence = ignoreHowever, I keep getting these messages over and over again:[Dec 14 18:53:14] WARNING[2247..
folks.recently some of our customers complained about bad voice quality on the phone system. i looked at the logs and found a lot of these:[2012-11-03 08:26:38] NOTICE chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 1[2012-11..
Is it possible yet to restart a single Dahdi span in any version of
Asterisk? (instead of all of them)
On Thu, Mar 15, 2012 at 05:44:53PM +0100, Johann Steinwendtner wrote: > is there a way to disable a span for maintenance purpose (i.e. send yellow alarm) ? This could be a good feature to add to the dahdi_maint utility. > What would be the correct io..