ICE Consuming High CPU

Report
Question

Hi,

I am on asterisk 12.6.0. Previously I was using 10.0.1 and for Gtalk I was using chan_gtalk and jabber configuration. But on 12.6.0 I tried to use chan_motif, asterisk starts consuming 100% cpu. From pstack trace I got it is because of ICE and to run motif ICE is necessary. Has anyone else seen this issue or any solution for this? I am using neither STUN nor TURN. I have just enabled ICE in rtp.conf.

Regards Mayank Kumar Gour

Asterisk Users 9 months ago 2 Answers

Google Voice With No Voice

Report
Question

Greetings all,

I was reading the documentation tonight, and decided to try Google voice with my asterisk.

I was able to setup iksemel, connect to google using jabber, and connect to google voice using gtalk.

Here is my physical configuration:

Digium D70 <-- private network 192.168.1.x --> Airport express <--> Internet <--> Asterisk with public IP

My asterisk has the following ports open: 5060 tcp/udp from my Airport Express public IP and from voice.google.com 10,000:20,000 from my Airport Express public IP and from voice.google.com

My issue is that when I place a call with google voice, I have no audio path at all in both…

Asterisk Users 2.7 years ago 24 Answers

Calls From Talkonaut To Pstn Phone

Report
Question

Hi I need to call from talkonaut to PSTN number using our Asterisk server. VoIP service which allows utilizing GPRS, 3G or WIFI mobile data connections to make free of cheap VoIP calls to phones through my SIP network, to Google Talk, MSN, AIM or Yahoo through Gtalk2VoIP soft-switch in which I can set up on my Asterisk server in INDIA servers to deliver VoIP calls from branded-Talkonaut users to your SIP network, to VoIM clients and vice versa. I have configured like this

Dial plan (extension.conf) is

[gtalk_incoming] exten => s,1,Verbose(2,Incoming Gtalk call from ${CALLERID(all)}) same => n,Answer() same => n,Dial(SIP/1000,30)…

Asterisk Users 3 years ago 0 Answers

AstLinux 1.0.0 release

Report
Question

The AstLinux Team is happy to announce the release of AstLinux 1.0.0. This release includes significant changes and improvements over past releases. Specific upgrade and new installation instructions are available at: http://www.astlinux.org Some of the highlights include: * Using eglibc instead of uClibc. This allows binary compatibility with add-ons that are provided as binary only (G.729 CODEC, Fax for Asterisk etc). * Newer Kernel which better supports newer hardware * Support for Jabber/Gtalk * Removed mISDN support (the zaphfc DAHDI driver is included for single port ISDN cards) A full changelog is available on the release pages. We provide…

VoIP News 3.8 years ago 1 Answer

chan_gtalk and res_jabber missing?

Report
Question

Hi All, While I'm certainly comfortable compiling from sources, I'm trying to do an
rpm only asterisk install on CentOS 5.7. I'm using the asterisk
repositories and I installed all the asterisk18 rpms, but find that
chan_gtalk and res_jabber are missing. Is there a separate rpm that includes support for gtalk? Thanks in advance. -Gaurav

Asterisk Users 3.8 years ago 3 Answers

GoogleTalk Calls

Report
Question

@bakko I do not know anything about 10.0 but 1.6.2 problem most likely can be
fixed by a simple patch which is not being committed for unknown reason
since late August 2011. https://issues.asterisk.org/jira/browse/ASTERISK-18301?focusedCommentId=183734#comment-183734 -Vladimir On 10/18/2011 6:44 PM, bakko wrote:
> Hello,
>
> Is there any issue with gtalk module?
>
> Whent I try to call asterisk gtalk user nothing happens on the
> asterisk console. Asterisk 1.6.2.20
>
> With Asterisk 10.0.0 beta 2 and the same configuration, works.
>
> ???

Asterisk Users 3.9 years ago 1 Answer

chan_gtalk load error

Report
Question

Hi, When starting Asterisk (1.8.5.0) I see in messages: [Jul 18 15:47:50] WARNING[15491] loader.c: Error loading module 'chan_gtalk.so': /usr/lib/asterisk/modules/chan_gtalk.so: undefined symbol: ast_aji_get_client
[Jul 18 15:47:50] WARNING[15491] loader.c: Module 'chan_gtalk.so' could not be loaded. Yet I do have iksemel installed: ls -l /usr/local/lib/libik*
-rw-r--r-- 1 root root 281994 Jul 18 16:14 /usr/local/lib/libiksemel.a
-rwxr-xr-x 1 root root 822 Jul 18 16:14 /usr/local/lib/libiksemel.la
lrwxrwxrwx 1 root root 19 Jul 18 16:14 /usr/local/lib/libiksemel.so -> libiksemel.so.3.1.1
lrwxrwxrwx 1 root root 19 Jul 18 16:14 /usr/local/lib/libiksemel.so.3 -> libiksemel.so.3.1.1
-rwxr-xr-x 1 root root 165132 Jul 18 16:14 /usr/local/lib/libiksemel.so.3.1.1 and checking whether…

Asterisk Users 4.2 years ago 1 Answer

asterisk + stun

Report
Question

is there general documentation on how asterisk behaves as a stun client
(besides res_stun_monitor.conf) ? e.g.,:
* can asterisk use multiple stun servers ?
(im interested in availability, not data parity) * what is the relationship between gtalk.conf's stunaddr and
res_stun_monitor.conf ? will duplicate queries be sent ? * Does asterisk provide some call (through AMI, console, etc.) that
shows the status of the stun interoperability? like 'stun show status'?

Asterisk Users 4.3 years ago 0 Answers