I am trying now for over 4 hours setting up cdr-logging via odbc into a
mysql database. But with no success. Do you have any hint for me?
Thanks for answer. Devices PAP2 and SPA3000 works good and use FSK for VMWI and CallerID, so I think TDM410P should also works. CallerID works good. So issue should be in source cod..
; I am afraid from IRQ misses: 1 The ISDN E1 was working fine on the machine, the electrical disconnected and then the Red Allarm. I checked the dahdi and I found that I have to reinstall dahdi again and I did. But still not becoming UP. The output..
I tried to send sms for local extensions and i observed that file is created but sms isnt delivered yet. Can someone help me with this thing? rr:/var/spool/asterisk/sms/mttx # cat ../../outgoing/smsq.mttx.0.1322430026-20217.1 Channel: Local/1010 Caller..
Hi I am testing a degium TDP400P (2fxo+2fxs) on my asterisk I configured incoming calls from pstn to ring my SIP phone (extension : 100) catextensions.conf … [from-pstn] exten => s,1,Dial(SIP/100,10) same => n,VoiceMail(100,u) root@PC-debian:/etc/asteri..
We have got a new PRI card at one of our Office locations and now I need to install the the device on a remote server. Is there any way to know if the device is loaded already.When I give cat /proc/zaptel/* it returns the following.# cat /proc/zaptel/*S..
Is libpri rpm version 1.4.12 for CentOS 5.6 made available ? [root@ ~]# rpm -qa | grep libpri libpri-184.108.40.206-1_centos5 [root@ ~]# cat /etc/redhat-release CentOS release 5.6 (Final) [root@ ~]# [root@ ~]#yum list updates | grep libpri [root@ ~]# Ple..
You can run the script below as an hourly cron. Works for me. #!/bin/sh # clean-up Asterisk zombies # file clean_up.sh # $Id: clean_up all dead parent processes # use as cron task */30 * * * * root /usr/local/sbin/clean_up.sh ######### ##LOG=/var/log/asterisk/agi-cleanup…
All, I have asterisk 220.127.116.11 and having issue with not getting VoiceMail email. I can send mail through command line using sendmail but not via asterisk. We have centralized zimbra email server. why its trying to send email to local 127.0.0.1 addre..
On 04/05/2011 01:52 PM, firstname.lastname@example.org wrote: > Under linux-2.6.38 I was able to compile and install dahdi, however when > I ran dahdi_cfg -vv, I got an invalid argument on my fxs port.I have > an old 400P card with one FXS and one FXO modul..