I need help to solve a problem that I am having using Asterisk 13, PJSIP and T38. My setup is as follows: SIP Provider –> Asterisk 13 –> Patton –> Physical Fax I need to get the fax directly in T38 to Patton. The provider sends me the fax in T..
I have a problem with movistar in Mexico with a sip calls. Movistar send to me T38 and G729 in the INVITE and they say that I have to ignore T38 and use G729 in the voice call.When a fax call is made Movistar send only T38 in the INVITE.Invite example:v=0o=GDL-BMSW-..
Im getting error: FAX session 9 is complete, result: FAILED (FAX_FAILURE_PARTIAL), error: 3RD_T2_TIMEOUT, pages: 1, resolution: 204×196, transfer rate: 9600, remoteSID: when I tried send fax more than 2 pages to Asterisk using T.38. First I set sp..
When the T.38 re-INVITE is rejected by your SIP peer, they sent an SDP offer with the audio stream set to port number zero (’0′). This means the audio stream is not active, and thus cannot be used. Hence you could enable the fallback (f) opt..
does anybody know a good tutorial on how to setup asterisk to receive faxes
(no need to send them) ? ive tried using app_fax.so with T38 but i keep
getting Transmission ..
I currently us Linksys/Ciscio, Grandstream and AudioCodes atas. none of the three perform well in all enviroments. Between stablity issues, T38 and DTMF talkoff all three suffer some combination of issues. I am looking at Patton and Innomedia. Has ..
In the simplest terms I can think of, Im going to describe what I want to do: this is called T.38 gateway mode. Asterisk 1.8 was just enhanced to provide some new APIs that will benecessary for seamless implementation of T.38 gateway mode, and weexp..