Carlos How about to perform the call transfer operation (screened and unscreened) andtrace the communication it will better on Nortel PBX side, in order to know which point is causing call transfer failure. By the way these kind of features is complica..
On a 1.8.10 system, Ive got (with cdr show status) :
Call Detail Record (CDR) ..
list, I have a client whos taking intermittent errors on their PRI. The server is configured with one PRI from the TELCO, and two PRI connecting to their Iwatsu ADIX legacy system. The odd thing is, the system can run for days, weeks or months with..
Dear Chris How about to use 2 Asterisk system interconnected through Wireless solution point to point one system should be for ISDN BRI gateway with Digium PCI card and the other server for extension voice mal and so on. for covering distances it w..
all, Ive tried to explicitly set my two PSTN trunks/FXO lines to alaw with: alaw = 1-2 in /etc/dahdi/system.conf. However, when I do this, all I get is loud intense noise on the line and nothing else – cant dial, cant make calls, cant receive cal..
list, Im looking for a solution where I need a DECT system with handover or repeaters for at least 10 simultaneous calls. The Snom m9 supports handover but I believe its incompatible with asterisk since it requires to have the same SIP account associa..
Can be done calls from each system? How about to capture data with Wireshark?
I have experiences Asterisk with Panasonic with H323 without any problem.
Mc GRATH Ricardo
Anyone have an H.323 trunk tied between their Avaya and Asterisk box that works? I am having some issues trying to get the two systems to connect. I am using the ooh323 channel to try to make the connection between the two system. I have all my conf..
Hi! I am setting up a little call center, but dont know how the agents system works, can you guys please give me a little help? I need to know how asterisk will know when I log agent X, and asterisk know that agent is in the IP Z with the extension..
Im trying the Call Completion system. All work fine. I still dont undesrtand how Asterisk work. Does Asterisk use sip signaling or other protocol to send notifications? On the Asterisk Wiki seems that the system is based on draft-ietf-bliss-call-completion..