Actually I can start and receive SIP calls (PC client, iphone client) but I have an issue with calling external number throught PSTN (certified-asterisk-1.8.11-cert2). Im having this error when making a call: *CLI> == Using SIP RTP CoS mark 5..
On 05/10/2012 09:39 AM, Arif Hossain wrote: > I have following sip account : > > Name/username HostDyn > Forcerport ACL Port StatusDescription > demo-alice/demo-alice 192.168.7.47 D > N 1080 Unmonitored > demo-bob/demo-bob 192.168.7.47 D > N 5060 Unmonito..
DAHDI 2.6.0, dahdi show status DescriptionAlarmsIRQbpviol CRC Fra Codi OptionsLBO Wildcard TDM400P REV I Board 5 OK000 CAS Unk 0 db (CSU)/0-133 feet (DSX-1) Dahdi 1 is an internal extension, dahdi 4 is pstn. This call completes. But DAHDI comes b..
On a (bogus) system equiped with a Digium HA8 and 8 BRI ports, Im reading this: # asterisk -rx dahdi show status DescriptionAlarmsIRQbpviol CRC4 Fra Codi OptionsLBO HA8-0000 RED 10900 CCS AMIYEL0 db (CSU)/0-133 feet (DSX-1) HA8-0000 UNCONFI 10900 ..
A telco has recently installed a new line in our building and I need to connect it to my Asterisk server with a Digium PRI card. Its not the first time I set up and configure a PRI link but Im failing to make this one work. The only information I ..
people! I have managed to set up asterisk 1.8.5. with my 2 ISDN HFC boards on asterisk. On which DAHDI tells me also properly that both of my boards are registered, one in TE and the other on in NT mode. Calls do successfully come inside, but I w..
On Tue, Aug 16, 2011 at 10:48 AM, Shaun Ruffellwrote: > On Tue, Aug 16, 2011 at 10:31:54AM -0400, Eric Merkel wrote: >> I am having a problem with a new PRI turn-up on dahdi 2.5.0 and >> asterisk 1.8.5 that I have not seen before. The PRI is setup..