In a machine Ive got :CLI> pri set debug off No such command pri set debug off (type core show help pri set for other possible commands)CLI> core show help pripri intense debug span pri service disable channel Remove a channel from servicepri serv..
your PRI is not up. You can see this Status: In Alarm, Down, Active it means you have some error. Some parameter is not correct with the configuration and with your line. If you are using Sangoma card then please check this link http://wiki.sangoma.com/wanpipe-linux-asterisk-debugg..
As per you suggestion I write small php scripts but didnt get result. Below is the php script and output of programs too. *PHP Script:-* < ?php $priline = system(/usr/sbin/asterisk -rnx pri show spans,$pri); $asterisk = system(/etc/init.d/asterisk stat..
! We currently have a PRI gateway composed by a box with two Digium quad-span PRI cards (a TE420 and a ). One of the cards is filled with TELCO1, while the other has first two slots filled with TELCO2, and 3rd slot with TELCO3. I am currently hav..
Recently, I made issues after upgrading libpri from 220.127.116.11 to 18.104.22.168. After coming back to 22.214.171.124, everything ran successfully. Unfortunately, I didnt have much time to spend to investigate but I hope Ill soon get an opportunity to try 1.4.1..