Dear In essence Caller ID ETSI and FSK US (Bellcore) is based on the same pattern as; _____________ ____________________________ _____________________________ |First Ring burst |_500ms_|Channel seizure 300 bits|__|Mark Signal|__| Caller ID Message|_..
Carlos It could help if you can get a trace of the call transfer from Nortel to SIP extension on the Asterisk (1303), if no way to get from Nortel get from Asterisk. I guest operator try to make a bind call transfer, without wait complete DR2 signall..
Carlos How about to perform the call transfer operation (screened and unscreened) andtrace the communication it will better on Nortel PBX side, in order to know which point is causing call transfer failure. By the way these kind of features is complica..
Im not agree problem could be cause from IRQ setting, I think in that way problem should be more unstable, moreover no voice communication problem with DAHDI service start up.
Mc GRATH Ricardo
Anam It seem should be work, but I just have a question about chan_dahdi.confregardless to parameter rxwink=300; Atlas seems to use long (250ms) winks By the way gain parameters shouldn´t have any effect to CID signal processing, how about to comme..
rosli sukri Well what I see releaseit becomes from outbound PRI server (PSTN or whatever). By the way it seems according to the PRI tracefirst call label 32771 have an uncompleted process,voice communication isn´t established (Answer connect acknowle..
Dear Chris How about to use 2 Asterisk system interconnected through Wireless solution point to point one system should be for ISDN BRI gateway with Digium PCI card and the other server for extension voice mal and so on. for covering distances it w..
Can be done calls from each system? How about to capture data with Wireshark?
I have experiences Asterisk with Panasonic with H323 without any problem.
Mc GRATH Ricardo