I am interested in learning more ablout Asterisk. Is there a recommended link for getting started. Can I set up an Asterisk server on my Win 7 local host ?? Is this what I need to do or is there another way of becoming familiar with the Asterisk prod..
Looking for help with an initial config of a Mediant 1000 with single
T1/PRI.Need to route calls to an Asterisk server as well as a fax
server.Please email me offlist.
is it possible to read the DTMF tones from a caller while he is in a meetme conference?
I would like to read the pressed key sequence and call a command like MeetMeAdmin or System Commands.
Im using Asterisk 1.8.7.
Thanks for hel..
Im not agree problem could be cause from IRQ setting, I think in that way problem should be more unstable, moreover no voice communication problem with DAHDI service start up.
Mc GRATH Ricardo
Anam It seem should be work, but I just have a question about chan_dahdi.confregardless to parameter rxwink=300; Atlas seems to use long (250ms) winks By the way gain parameters shouldn´t have any effect to CID signal processing, how about to comme..
All, I have one question that if my device is registered over TLS on asterisk . is it required that it can only use SRTP for making an outbound calls or incoming calls too. how we can disable srtp and only enable TLS. is there any dial-plan functi..
Dear Moderator, I need an assistance for below problem: 1. there are time incoming call from extension 100 that I dont create, how to know where is the origin of this extension? 2. when I pick up the call, there is no sound at all, this is very iritat..
i need to know how can i configure a D 300JCT with asterisk, i want to connect two PBX where each one have this card on it,i really need your help as soon as possible. i already done some file configuration system.conf and in chan_dahdi.conf and i h..
every one ,
please some one help me, i need to configure to PBX using each E1 card(D
300 JCT) so please if some one can tell me how can i configure each card
and how can i connect those two PBX usinga cross over cable RJ45.
thanks in ..
, I have a Polycom FX video unit and Im thinking maybe I can integrate it on our Asterisk Server to be able to do teleconference and video as well via Polycom FX. I already have oh323 configured on my Asterisk box and I just no idea on how to let t..