Using a T.38 termination, you can receive faxes using g729, but not while using alaw. If thats the case, your Asterisk installation will need to detect the Fax Tones so as to make the decision the incoming call is a fax and then switch to the fax extensi..
I have anolog lines coming throug Dahdi to Asterisk Server, one of the anolog lines is used for fax line. I received fax fine without any problems using Iaxmodem with Hylafax Server. Outgoint fax is the problem, when IAXMODEM dial out using Dahdi chann..
On http://pastebin.com/AP5GBWUR you may see an excerpt from asterisk full log that includes a failing fax sending session. As you can see in line 328, the transmission fails with error Received bad response to DCS or training. It seems that someth..
Does SendFAX have the ability to put the caller ID and timestamp on the fax?
If so, is there a way to adjust the timezone used for the timestamp?
Thanks for any assi..
I would like to know whether SpanDSP supports T.38 for Asterisk 10? Because
as far as using Fax for Asterisk, Im getting some issues usi..
I am using asterisk 220.127.116.11 , I am using Spandsp FAX Driver: 20091228 123351, i will clearly explain my scenario. I am sendingfax to a anlog fax machine which is connected tomediatrix analog gateway. say the analog fax extension is 18260. I have enabled..
I figured out the problem. Actually the sending fax machine speed was set as 33000 bps, later I set to 14400 bps and in my dial plan, I forcefully set to use T.38 protocol. After that I was able to receive fax. Thanks Tim for assisting me out :). > –..
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested with