The built in (non-programmable) transfer button on the MiTel 5330 does a blind transfer.Any ideas on how to make it do an attended transfer instead?Instead of DTMF tones, it seems to send a SIP message to do a transfer.Ive been unable to find a way..
I place a call to a Polycom phone, it answers, my AGIcalls Exec SendDTMF 111111 but I do not hear the DTMF tones on the phone.Why is ..
is it possible to read the DTMF tones from a caller while he is in a meetme conference?
I would like to read the pressed key sequence and call a command like MeetMeAdmin or System Commands.
Im using Asterisk 1.8.7.
Thanks for hel..
I suggest you put in dtmfmode=auto (so rfc2833 / inband ) can be selected dynamically. Wanted to check with the community if this feature holds true on latest versions of Asterisk ? Regards, Mitul Limbani, Chief Architech & Founder, Enterux Soluti..
I am having a problem with SendDTMF()- 50% of time it did not succeed. I suspect it is not sending clear DTMF tones to the IVR. For example: SendDTMF(wwwww3wwwww2wwwwww1wwwww4) Sometime digit 3 and 2 work, and failed to do digit 1. Sometime digit 3 w..
19 sep 2011 kl. 01:51 skrev Zeeshan A Zakaria: > This DTMF problem has always been there and there is no real solution for it, other than using those expensive PBX systems like that from Avaya, Cisco, etc. This problem happens when you are sending inb..
I am dtmf recognition issues. Out bound calls go though dahdi trunk/sangoma a400. Dtmf tones are not being recognized. Is there any issues with the latest polycom firmware?
Sent from my android ..
I am from saudi arabia and using asterisk 184.108.40.206,Dahdi-2.3.0 and Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) . I am facing problem with detecting caller id before first ring.I recorded the dahdi channel using dahdi_monitor comma..
list, Im having some troubles with DTMF tones. When pressing numbers on a Snom phone, the DTMF-signal takes too long. I have the following in sip.conf : dtmfmode = rfc2833 which works well for Grandstream, Yealink and Cisco phones. But not for Sn..