* You are viewing Posts Tagged ‘Cmd’

use of Read cmd with AGI

Hello,

Using AGI script to accept the input from caller but input value is not getting stored in variable.

Extract from AGI Script:

$agi = new AGI();
$agi-> exec(‘Background’,’press_one0&press_two0&press_zero0′);
$agi-> exec(‘Read’,’NUMBER,,1,3′);
$agi-> verbose (“You have entered”.$NUMBER);

Console Output:
AGI Script Executing Application: (Background) Options: (press_one0&press_two0&press_zero0)

Asterisk 1.8.x app_meetme.so

Hello,

I can’t seem to use MeetMe app in asterisk versions beyond 1.8. Its source
file app_meetme.c is present in the apps dir. Also, I can find app_meetme
change-logs on the asterisk website. However, the dialplan doesn’t have
this cmd. I have checked menuselect but it says it has been replaced by
app_confbridge.

Also, If that *is* the case, does ConfBridge (the newer version of meetme)
offer the same options? How do I use them?

any iLBC folks around?

since www.ilbcfreeware.org is broken, asterisk installs that want ilbc
are failing.

I have no idea how to contact them since the site is offline. It’s been
offline at least 12 hours – I can’t imagine they *don’t* know but at the
same time it’s still offline..

pbx1> dig +norecurse @a0.org.afilias-nst.info ilbcfreeware.org ns

; < <>> DiG 9.6-ESV-R1 < <>> @a0.org.afilias-nst.info ilbcfreeware.org ns
; (2 servers found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER< <- opcode: QUERY, status: NOERROR, id: 58731
;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 2, ADDITIONAL: 0

;; QUESTION SECTION:
;ilbcfreeware.org. IN NS

;; AUTHORITY SECTION:
ilbcfreeware.org. 86400 IN NS ns84.worldnic.com.
ilbcfreeware.org. 86400 IN NS ns83.worldnic.com.

;; Query time: 34 msec
;; SERVER: 199.19.56.1#53(199.19.56.1)
;; WHEN: Fri Sep 2 16:03:38 2011
;; MSG SIZE rcvd: 84

pbx1> dig +norecurse @ns83.worldnic.com ilbcfreeware.org ns

; < <>> DiG 9.6-ESV-R1 < <>> +norecurse @ns83.worldnic.com ilbcfreeware.org ns
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER< <- opcode: QUERY, status: SERVFAIL, id: 50898
;; flags: qr; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;ilbcfreeware.org. IN NS

;; Query time: 15 msec
;; SERVER: 205.178.190.42#53(205.178.190.42)
;; WHEN: Fri Sep 2 16:03:41 2011
;; MSG SIZE rcvd: 3

Simple way to bridge two channels?

Hello

I’d like to know what my options are to bridge two channels after
calling each through Dial().

I know about MeetMe, Conference, and Konference. Are there other
options available just to bridge two calls?

www.voip-info.org/wiki/view/Asterisk+cmd+MeetMe
www.voip-info.org/wiki/view/Asterisk+cmd+Conference
www.voip-info.org/wiki/view/Asterisk+cmd+Konference

I’d like the simplest possible solution since Asterisk is running on a
non-x86 appliance, so code must be cross-compiled.

Thank you.

cmd MySQL

Hi guys,

I’m trying to connect Asterisk to the MySQL, but I can’t execute it. It
returns an error, as below:

queue called by agi doesn’t re-enter the script

http://www.voip-info.org/wiki/view/Asterisk+cmd+DeadAGI

read the part at the bottom about ignoring sighup, if you’re using a
later version i think there is a option like agisighup that you can
use in the dialplan