Greetings.Ive plugged 3 analog lines on an ethernet cable in an Khomp card to receive its incoming calls. Without any configuration, when I call those numbers the asterisk server automatically answer the call and play the default music.The problem ..
Asterisk 1.8(a) We will have a group of 4 analog lines into a digium card that will be used for local calls.What is the best way to use those lines as a pool for outbound calls?Can I use ChanIsAvail(), listing those 4 channels, and then use the fi..
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested with
all, Im trying to solve a problem on a T1 span setup wherein calls are apparently not hanging up properly. The system in question is using a Xorcom Astribank with 1 full and 1 partial T1 span, and running Asterisk 1.4.36. The symptom is that when a c..
This is a very strange problem (at least for me). I just realized that started from April 20th 2012 every inbound call is from unknown. Prior that, asterisk succesfully displayed the caller callers ID for SOME of the calls (30-50% success rate). I..
Howdy All, Im considering Asterisk / Digium as a replacement to my existing phone switch. I need to continue to be able to push analog lines between multiple buildings in a campus environment. The Digium Analog 410 Card manual states its not recommen..
Greetings- I currently have a customer that *requires* key-system functionality in an Asterisk PBX. On a SIP phone, the BLF keys need to show the current state of the analog lines attached to the system (DAHDI FXO). By pressing one of these keys (..
I recently switched to a PRI from analog lines. For reasons out of my control, my vendor had problems getting the PRI to interface so they set it to use T1-CAS instead. The lines are working just fine for inbound and outbound calls, except I get no c..
All, I am having Problem in detecting DTMF on analog lines. basically are system is in india and telco provider is BSNL [Bharat sanchar Nigam LImited]. We have Purchased Analog card From chinaroby.com which is X1600P 16 port FXOcard. they also prov..
Im looking for some advice on how to solve DTMF issues. I have 2 boxes, one which is the connection to the PSTN (PSTN) through PRIs and SIP trunks, and a second (PBX) which has UAs registered to it. We have a customer that has an existing pbx that..