Hey, all.Just added an analog card to our dual-T1 system… and clearly Im doing something wrong.Less interested in having the specifics pointed out than in finding out how/why certain things work.So, really, three things:* What the bloody Hell is ..
What things do you wish you had been warned while configuring Digium Cards at clients site? These tips and suggestions will help you avoid pitfalls that will arise (according to Murphys law) late in the night and when you have the bigger pressure..
Hi.im starting my first steps with asterisk, but i have a doubt about my card.lspci show the card correctly01:07.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog card (rev 11)but when i run dahdi_scan dont show nothing.How can i det..
>> 1) Is there a way I dont know about to get Asterisk to talk to either the IPRC or the IP Phone+ directly in such a way that gets >> calls from one to the other? Since youve stated that your budget is absolutely zero, Id have to say no.It also depe..
Tim, Thanks for your response. Here is my topology as listing down below; PSTN Line –> Cisco Voice GW –> IP Cloud –> Asterisk Will Asterisk able to receive the fax (as in topology above) using its fax module? In sip.confI enabled fax detection ..
Ade- > Does anyone do a low profile PCIe FXO card? I just picked up an HP ProLiant > microserver for $nuppence, which Id hoped to migrate my Asterisk setup > onto. I currently use an A400P analog card, but the ProLiant only has PCIe > slots, and the..
all, Couple of things I would like ask, does Asterisk provides free license for FoIP (for 1 channel) or need to purchase it? Couple of years back, I was able to send and receive the fax using Digium T1 card, in term of FoIP how can I able to rece..
My analog card, uses a PCI slot and a 12V power connector, is configured with 2 FXO and 2 FXS modules.I can ring handsets connected to the FXS ports but I cant dial out from them.Is extensions.conf where I need to make changes? [root@robin asteris..
> In our office, we were running an Asterisk 220.127.116.11 machine with DAHDI > 18.104.22.168, FreePBX 2.8.1 and an analog DAHDI card with 8 FXO ports. This > machine had several DAHDI trunks defined in the FreePBX interface, > each one containing a single DA..
All, I am having Problem in detecting DTMF on analog lines. basically are system is in india and telco provider is BSNL [Bharat sanchar Nigam LImited]. We have Purchased Analog card From chinaroby.com which is X1600P 16 port FXOcard. they also prov..