A few months ago we upgraded our server from Asterisk 126.96.36.199 on CentOS 5.9to Asterisk 13.13.1 on CentOS 7. We are still using SIP not PJSIP.Since the upgrade our remote users conversions are choppy.Here is what my sip.conf looks like for the us..
Best practices examples to upgrade Asterisk 13.13.1 to latest version? Any suggestions?Tha..
In Master.csv Asterisk is loggin the Company ID set in Extensions.conf, but I configured logger.conf tolog the EXT ID. For instance, the SRC in the following line should be my ext. number. Does it make sense? From my extension 4007 I called 780797..
I am looking for CDR reporting solution? Any suggestions? I am using Asterisk 13.13.1I would like a report on number of calls per extension.Tha..
fail2ban does not ban offending IP.NOTICE chan_sip.c: Registration fromuser3 failed for offending-IP:53417 – Wrong passwordNOTICE chan_sip.c: Registration fromuser3 failed for $B!F(Boffending-IP:53911 -Wrong password systemctl sta..
I have a user that prefers Soft SIP phone install on his laptop, for security reasons I have enable TLS on our Asterisk server to support TLSauthentication, It works well with hard phones. Has anybody in this forum use SIP Soft phones with TLS authenticat..
my server is running a fresh install of Asterisk 13.13.1 on CentOS 7. My extensions.conf file was mostly copied from server running Asterisk 1.8. That being said! If I dial a number and get a busy signal I get the following error:– SIP/voipeer-00000..
I recently upgraded from Asterisk 1.8 to Asterisk 13. Now users are starting to complaint about packets loss, conversations are choppy! I dont even know where to start looking! Choppy conversations happened within users. I am using sip.conf type=friendcontext=sip-phonecall-limit=2trustrpid=nocallerid=d..
my SIP provider requires 10 digits for all outgoing calls; Users dial 7digits for outgoing.Here is how I added the area code to all outgoing calls in Asterisk 1.8 Extensions.conf; Adding Area code and striping 7 for local numbersexten => _7XXXXXXX,n,Set(CALLERID(all)..
All, The problem Im facing is the following: two machines that require analog signal. However, connection to the world is setup as follow: T1 connection to Asterisk serverAny suggestions on how to convert digital signal to analog? Type of card on..