I copied a setup from an older 1.8.5 installation to an 11.15 installation, and Im having problems getting call files to work.Here is the extension setup Im using:[outbound-swift]exten => _[a-zA-Z].,1,Answer exten => _[a-zA-Z].,n,Playback(AAA/check_ip_failure);ex..
Using Dahdi/PRI, I end up with channel names like DAHDI/i8/9995551212-4d6B, but when I do a core show channels it cuts off those names to only DAHDI/i8/9995551212-.This is the same for AMI.Is there a way to get the full channel name within AMI?Im us..
On one of our servers, were having problems with incoming faxes. The connections come in through a PRI into a Digium TE820 card.fax show stats yields the following:FAX Statistics:—..
I have an installation that has analog phones connected via T1 channel banks.Im getting complaints from users that they will enter a partial number (eg 91213), then turn away to get the next few digits, and the system will start dialing before they h..
I have several adtran 624 with 24 FXS ports hooked up to analog phones.The adtran is connected to asterisk via a channelized T1 into a digium TE820.I have hardware echo canceling enabled on all channels/spans, but there is still echo on the lines ..
When doing a dahdi show channel X from the asterisk console, when the line is not part of a call the echo cancellation line ALWAYS says currently OFF.Once a call is in progress, it will change to ON.Is this a bug, or is the behavior by design?My setup:Aster..
Is there a doc somewhere that explains when to use loop start vs. kewl start in certain situations?Ive seen in a lot of posts that most people just say use kewl start, but nobody really explains why.It seems that if kewl start should be used 100%..
A bit off topic, but does anyone know what happened to the freepbx.org website and when its coming back onli..
Is there a way to specify default files to use for new mailbox creations?For example, when a mailboxs directory structure is created, there is no greeting, unavailable, or busy messages, so the incoming calls get the message: The person at extens..
In http://packages.digium.com/CentOS/ there is not yet a CentOS 6 branch (Nor is there a RHEL 6 branch).CentOS 6.0 was release in July of 2011 – is this something that digium is planning on supporting?Or is there a different URL that Im not aware..