Does anyone on this list know how to make the Snom870 with FW:220.127.116.11display the Caller ID in the display field while the ringing either together with, or instead of, the topmost virtual key in the info column?I realise that the purpose of having ..
We use Snom870s together with Asterisk 13.14.0 and FreePBX18.104.22.168.I am having an ongoing problem with setting the BLFvalues on these phones from the configuration file generated from FreePBX.In FreePBX we employ the Commercial Endpoint Manager (C..
We run Asterisk 13 using the FreePBX 22.214.171.124 distro based on CentOS-6.4.We also run HylFAX+ 5.5.3 with iaxModem 1.2.0 on the same system with AdvantFAX as the web front-end.Our two fax lines are configured as iax2 DEVICES.These components have b..
We have a FreePBX-12 / Asterisk-12 setup that supports about 24extensions, most internal Snom870s but six or so external (Jitsi-2.8). we use TLS and SRTP everywhere on our side of the fence.The server host is a dedicated atom(tm) box using the Free..
Does anyone here have a Jitsi softphone set up with Asterisk such that SRTP is enabled, TLS is used to pass the SRTP key, and it works?Anyone?If so then what are the settings required for..
I am dealing with a FreePBX generated dialplan.I have been following the processing traces attempting to make use of the advice I received here respecting setting a custom ring tone. I have discovered that the context I am using for incoming calls..
I am trying to determine how the transfer button on the Snom-870 works with Asterisk.Is the ## special code employed as when it is entered through the handset or is the blind transfer through the phone function accomplished in a differen..
CentOS-6.5 (FreePBX-2.6)Asterisk-11.14.2 (FreePBX)snom870-SIP 126.96.36.199.5I am having a very difficult time attempting to get TLS and SRTPworking with Asterisk and anything else.At the moment I am trying to get TLS functioning with our Snom870 desk-sets…
+1-1 = 0I do not care about where people put their replies so long as I can figure out who is answering what.What I do not like to read is this interminable religious dogma about the natural order of writing.This is the second or third list this w..
Arch = x86_64OS = CentOS-6.4 (freepbx)Asterisk = 11.4FreePBX = 188.8.131.52I am trying to understand flow control in Asterisk dial plans and not having very much luck.I have read the Asterisk book from ORielly, or at least those parts I believe might app..