Asterisk 11.8.0 And 11.8.1

Home » Asterisk Users » Asterisk 11.8.0 And 11.8.1
Asterisk Users 2 Comments

I have used every asterisk 11.8.X version. Have not had an issue till 11.8.0 and 11.8.1
When I use ConfBridge I am attempting to put all participants in MUTE mode and just one talker…

However, since 11.8.0 I am hearing feedback in the announcement like the channel is not really muted. I dropped back to 11.7.0 and I hear no feedback.

Has something changed – or – am I not correctly setting up the confbridge? How do I tell whats up?

Thanks

Jerry

2 thoughts on - Asterisk 11.8.0 And 11.8.1

  • OK back in the office so I can get some files….

    in my confbridge.conf file
    [MessageNetConfUserMuted]
    type=user quiet=yes startmuted=yes announce_only_user=no announce_user_count_all=no announce_join_leave=no

    This is from the console so 410 and 411 are joining as MUTED.

    ^[[Kdevgeis*CLI> ^M^[[0K > Channel SIP/411-0000001c was answered
    ^M^[[Kdevgeis*CLI> ^M^[[0K — Executing
    [smvoice_pa_app_confbridge_intercom@smvoice-transfers:1]
    ConfBridge(“SIP/411-0000001c”,
    “PA0014,MessageNetConfBridge,MessageNetConfUserMuted”) in new s
    ^M^[[Kdevgeis*CLI> ^M^[[0K > 0x7f343c0137c0 — Probation passed –
    setting RTP source address to 192.168.1.38:8000
    ^M^[[Kdevgeis*CLI> ^M^[[0K > Channel SIP/410-0000001d was answered
    ^M^[[Kdevgeis*CLI> ^M^[[0K — Executing
    [smvoice_pa_app_confbridge_intercom@smvoice-transfers:1]
    ConfBridge(“SIP/410-0000001d”,
    “PA0014,MessageNetConfBridge,MessageNetConfUserMuted”) in new s
    ^M^[[Kdevgeis*CLI> ^M^[[0K > 0x7f345c013c30 — Probation passed –
    setting RTP source address to 192.168.1.39:8000
    ^M^[[Kdevgeis*CLI> ^M^[

    yet I hear feedback on the speaker.

    I start the call by calling a Local channel, with variables of what file
    (wave) to play and what devices to bring in conference.

    This all worked fine 11.0 -> 11.7. I have only encountered problems with
    11.8+
    dropping back to 11.7 works again.

    So how do I found out if its something I have wrong or was this introduced in 11.8+

    Thanks,

    Jerry

  • Hey Jerry, when something like this occurs suddenly between minor release versions, you can always check issues.asterisk.org/jira to see if it has been reported. A search for the words muted and confbridge, then ordering the results by creation date will show this issue:

    https://issues.asterisk.org/jira/browse/ASTERISK-23461

    Which looks like the same issue that you are having. If you click on the source tab you can see the commits it was fixed in. Looks like it was after 11.8.1, so you’ll have to wait until the next release, or grab 11 from SVN.