AsteriskNOW With AX1600P Card

Home » Asterisk Users » AsteriskNOW With AX1600P Card
Asterisk Users 3 Comments

Hi all!

I’m new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too.

I’m following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded

[root@pbx ~]# lsmod | grep -E “hisax|netjet|dahdi”
netjet 14618 0
isdnhdlc 4523 1 netjet mISDNipac 33989 1 netjet mISDN_core 73118 3 netjet,mISDNipac hisax 410162 0
isdn 119265 1 hisax dahdi_transcode 5240 1 wctc4xxp dahdi_voicebus 49368 2 wctdm24xxp,wcte12xp dahdi 207790 15
xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wcaxx,wctdm24xxp,wcte11xp,wct1xxp,wcte13xp,wcte12xp,dahdi_voicebus,wcte43x,wct4xxp,oct612x crc_ccitt 1369 4 isdnhdlc,hisax,wctdm24xxp,dahdi

and there is the output of lspci command:

[root@pbx ~]# lspci -vvvvvv -s 02:03.0
02:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Device b300:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- SERR-

3 thoughts on - AsteriskNOW With AX1600P Card

  • That looks like the result of a part-finished upgrade.

    You probably need to rebuild DAHDI *while the card is installed in the machine*, so it can detect the hardware properly; and then after doing that, you may need to rebuild Asterisk again.