Overlapdialing And No Digits In Setup Problem

Home » Asterisk Users » Overlapdialing And No Digits In Setup Problem
Asterisk Users No Comments

Hello!

I have asterisk which is connected to avaya definity. I set trunk to overlap. When I call to this trunk (so called tac in avaya) without any number I hear dial tone for some time, any digit I try to dial are ignored by asterisk- still tone, then call is rejected:

— Accepting overlap call from ‘6401’ to ‘‘ on channel
0/9, span 3
— Starting simple switch on ‘DAHDI/i3/6401-f’
— Going to extension s|1 because of empty extension received on overlap call
— Hungup ‘DAHDI/i3/6401-f’

on avaya side it looks like:

16:28:51 dial 802
16:28:51 term trunk-group 2 cid 0x66
16:28:51 dial 802
16:28:51 seize trunk-group 2 member 8 cid 0x66
16:28:51 Calling Number & Name 6401 D.Melekhov
16:28:51 dial 802
16:28:51 seize trunk-group 2 member 8 cid 0x66
16:28:59 denial event 1166: Unassigned number D1=0x6 D2=0x101
16:28:59 idle trunk-group 2 member 8 cid 0x66
16:29:01 idle station 6401 cid 0x66
16:29:01 tone-receiver 01AXX02 cid 0x6a
16:29:01 active station 6401 cid 0x6a
16:29:02 idle station 6401 cid 0x6a

but if I call on the same way panasonic, panasonic handles dgitis I dial:

16:31:25 hold station 6401 cid 0x52
16:31:25 active station 6401 cid 0x98
16:31:26 dial 803
16:31:26 term trunk-group 3 cid 0x98
16:31:26 dial 803
16:31:26 seize trunk-group 3 member 1 cid 0x98
16:31:26 Calling Number & Name 6401 D.Melekhov
16:31:26 dial 803
16:31:26 seize trunk-group 3 member 1 cid 0x98
16:31:29 Proceed trunk-group 3 member 1 cid 0x98
16:31:29 Alert trunk-group 3 member 1 cid 0x98
16:31:32 active trunk-group 3 member 1 cid 0x98
16:31:35 idle station 6401 cid 0x98
16:31:36 active station 6401 cid 0x9b
16:31:36 idle station 6401 cid 0x9b

Could you tell me how can I get the same behaviour from asterisk?
Looks like it just ignores dtmf…

Thank you!