Freeswitch With Digium T316 Timed Out, T316 Timed Out

Home » Asterisk Users » Freeswitch With Digium T316 Timed Out, T316 Timed Out
Asterisk Users 2 Comments

Hi

I am trying to deploy freeswitch with Digium TE121 card for my office setup, but it is continuously showing Signaling is up and channels are down except D channel. Our Architecture is like We have freeswitch installed with libpri1.4 and Dahdi. I am from India and here we are having E1 trunk.

Dahdi Configuration is

cat system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7 19:39:07 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCT1/0 “Wildcard TE121 Card 0” (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te bchan=1-15,17-31
dchan
echocanceller=mg2,1-15,17-31

# Global data

loadzone = uk defaultzone = uk

cat modules
# Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules)
on Wed Aug 7 19:37:48 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST. wcte12xp
# Xorcom Astribank Devices xpp_usb

dahdi_hardware pci:0000:02:08.0 wcte12xp+ d161:8000 Wildcard TE121

dahdi_scan
[1]
active=yes alarms=OK
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium devicetype=Wildcard TE121 (VPMOCT032)
location=PCI Bus 02 Slot 09
basechan=1
totchans1
irq=0
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts

2 thoughts on - Freeswitch With Digium T316 Timed Out, T316 Timed Out

  • My friend,

    You are in a wrong list, this an asterisk list, you should to be in freeswitch list

    Kind Regards

  • It seems that the ISDN switch you are connected to does not respond to the RESTART message. You should investigate what the chan_dahdi.conf resetinterval parameter is set to. See chan_dahdi.conf.sample for a description.

    Richard