Yes, I know, but Im a 1.2 Luddite.1.2 on 32 bits has been stable and rock solid for almost 10 years, but the client wanted to try it on a 64 bit version of CentOS 5.9.It all seems to be working OK, but when the customer service agents transfer a c..
We have some Asterisk servers that we are moving behind a NAT to preserve public addresses and make room for growth. This is Asterisk 1.4NAT works very good with the externip/localnet-setting when we are connected directly to our teleco. But when I ..
everyone,My setup:Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800Im trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card ..
It seems these device it works similar way as a Cisco phone, so no way to look how to configure the phone because is based on template files downloaded from main system, files are downloading by TFTP option #66 (new software configurations file et..
Id like to protect my expensive Digium FXO cards from spikes on my three incoming PSTN lines.Does anyone have any recomm..
My conference call wont go thru my SIP trunk.I may be missing a dialplan configuration setting as my PCM phone to phone calls go over the (GSM) tunk.The server with the conference:exten => 5777,1,GoTo(conf-confDemo,join,1)[conf-confDemo]exten => join,1,ConfBridge(confDemo/S/1)..
!Is the following application possible with Asterisk with the default functionality that is currently implemented?1. User dials in via PSTN / SIP.2. System announces random but individual PIN to user.3. If there are no other users, user gets put thro..
I was attempting to play with lua in Asterisk, but couldnt compile 11.4.0stable with LUA on my test box running CentOS 5.5 64bit.Ive download lua-5.1 from lua.org, and have used the following as ./configure:./configure –prefix=/usr/local/asterisk-11.4.0–with-lua=/usr/src/asterisk/lua-5.1/srcT..
All,Got a Customer that bought some Allworx phones but for some reason or another cant use the Allwork PBX.I dont know anything about these phones and cant seem to access the config web interface, http:///, just gives info, not sure how to config..
Arch = x86_64OS = CentOS-6.4 (freepbx)Asterisk = 11.4.0FreePBX = 188.8.131.52Snom870 HandsetsWe are in the process of moving to an Asterisk based PBX.At the moment most things work as we wish.However, I have just notices that when I force a reload us..