ISDN- E1 PRI Module In Network Side Signaling

Home » Asterisk Users » ISDN- E1 PRI Module In Network Side Signaling
Asterisk Users 3 Comments

Hello everyone. I am looking for a E1 PRI card which supports network side signaling not CPE. The main idea is to connect an plain old E1 compliant PBX which doesn’t have an VoIP module to the newly created VoIP infrastructure. Could we use a Digium TE122P or something other to resolve this situation?

Thanks in advance. Dimitar

3 thoughts on - ISDN- E1 PRI Module In Network Side Signaling

  • Use pri_net as signalling mode inside chan_dadhi.conf in /etc/asterisk/
    folder.

    You can set this up using any pri card thats supported on Asterisk.

    Mitul

  • In article , Mitul Limbani wrote:

    And you may need to make an E1 crossover cable. These are different from Ethernet crossover cables. You need to cross pair 1-2 with pair 4-5.

    Cheers Tony