Is There An Issue With 11.0.2 And Registration

Home » Asterisk Users » Is There An Issue With 11.0.2 And Registration
Asterisk Users 5 Comments

I am running 11.0.2 from 1.4.43 previous.

When I start up and do a “sip show peers” all devices are on and show an IP Address. After some time “sip show peers” shows two devices of my 12 as
(Unspecified).

I never had an issue with 1.4.43.

Is there some issue with 11.0.2 and registration?

Jerry

5 thoughts on - Is There An Issue With 11.0.2 And Registration

  • When you say “two”, is it two every time? The same two? Is there something different about the two that show this behavior? There isn’t enough information in your message.

  • Yes it is the same two devices every time. I have the server running 11.0.2 , I have 8 asterisk devices (1.4.43), I have two polycom phones. They all seem fine.

    Then I have two other devices (IPSpeakers) that run fine on 1.4.43
    and “some time” after inititally starting 11.0.2 they change from showing the IP address in “sip show peers” to showing unspecified. They work in the beginning until such time they show unspecified. Then if I stop asterisk 11.0.2 again, and restart it they start working again for some time.

    Jerry

  • Sounds like a registration timeout issue. What does the sip.conf entry look like for these?

    From: asterisk-users-bounces@lists.digium.com
    [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jerry Geis Sent: Monday, December 10, 2012 10:30 AM
    To: Asterisk Users Mailing List – Non-Commercial Discussion Subject: Re: [asterisk-users] Is there an issue with 11.0.2 and registration

    When you say “two”, is it two every time? The same two? Is there something different about the two that show this behavior? There isn’t enough information in your message.

    Yes it is the same two devices every time. I have the server running 11.0.2 , I have 8 asterisk devices (1.4.43), I have two polycom phones. They all seem fine.

    Then I have two other devices (IPSpeakers) that run fine on 1.4.43
    and “some time” after inititally starting 11.0.2 they change from showing the IP address in “sip show peers” to showing unspecified. They work in the beginning until such time they show unspecified. Then if I stop asterisk 11.0.2 again, and restart it they start working again for some time.

    Jerry

  • Hello,

    Try “pedantic=no” in sip.conf.
    Also, enable a SIP debug on the peers, check if anything out of the ordinary appears.

  • seems as though pedantic=no was the issue. they are staying online.

    further looking (which I seemed to miss) was in 1.4 pedantic as default no, in 11 default is yes. my sip.conf had no setting.

    Thanks,

    Jerry