I know this a little bit off topic but maybe someone of you has experience with this topic. I want to run a hylafax install in an openvz container with iptables. My Problem is that I can load the kernel module for ftp connection tracking (nf_conntrack_ftp..
I figured out the problem. Actually the sending fax machine speed was set as 33000 bps, later I set to 14400 bps and in my dial plan, I forcefully set to use T.38 protocol. After that I was able to receive fax. Thanks Tim for assisting me out :). > –..
Yesterday a customer was attacked from the following IP addresses so
add them to your blacklist:
iptables -A INPUT -s 220.127.116.11 -j DROP
iptables -A INPUT -s 18.104.22.168 -..
During testing with the Digium phones I have run into a problem where I try to make a change to the sip device name. I make the device name change in sip.conf then make the matching change to the lines in res_digium_phone.conf. I then do sip reload ..
is there someone who successfully get info about attended transfer from CEL? if yes, can you post some hints/algorithm/…? scenario A – customer B – secretary C – consultant1 D – consultant2 A -> B B axfer C C axfer D i need to know time B with C (consultati..
On 06/05/2012 12:39 AM, Klaverstyn, David C wrote: > Guys, > > All my installs are based on PRI ISDN. I now have a site that I need to > install BRI. As I have not done a BRI install before I’m wanting to get > some information from the people in ..
Asterisk 1.4 We are experiencing an issue on transfers where no progress tones are heard by the caller: 1. Call from 1593 (SPA525G 0026998D2FFFF) to 1595 (SPA922 000B820AFFFFF). 1595 answers 2. From 1593 initiate transfer to 1597 (SPA508G 1CDF0F4AFFF..