Dear Chris How about to use 2 Asterisk system interconnected through Wireless solution point to point one system should be for ISDN BRI gateway with Digium PCI card and the other server for extension voice mal and so on. for covering distances it w..
I am struggling to get the mac-addresses of IP phones that are connected to asterisk as the phone are in different VLAN with * and they were manually configured. I want to centralize their configuration using res_phoneprov or tftp I have tried nmap ..
Greetings list, Im trying to source a very basic ISDN BRI -> SIP gateway. Unfortunately, everything Ive seen seems to want to do lots of other things – registering handsets, IVRs, voicemail, etc. I only want it to present an ISDN BRI as a SIP acco..
all, I have problems starting dahdi. dahdi_cfg -vvv allwasy comes back with: DAHDI Tools Version – 184.108.40.206 DAHDI Version: 220.127.116.11 Echo Canceller(s): Configuration ====================== SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) Chan..
Ive got the following setup: PSTN/ISDN < ---- E1-----> Asterisk< ---- E1-----> Alcatel 4400 PBX < ----> TDM phones When a TDM phone is dialing out to a national number, it seems that the PBX is using enbloc dialing. When a TDM phone is dialing out..
all, have asterisk set up in combination with fail2ban. all works as expected only there is 1 extension that is trying to register with a wrong password causing fail2ban to block the IP address, normally that is ok behaviour but i have several extensi..
I would like to install Dahdi, libpri and Asterisk of different versions in one machine. Lets say, Asterisk 1.6.X, Asterisk 1.8.x and Asterisk 1.4.x to be installed in one machine, this can be done using prefix while building configure. For dahdi, lib..