How Can I configure the between call oneside IVR

Home » Asterisk Users » How Can I configure the between call oneside IVR
Asterisk Users 3 Comments

Hi list,

how we can configure between call add the IVR.
My scenarios is
“A” get the incomming call from “C”.In between them I need to one side IVR
play for “C”, “C” enter the some DTMF inputs and “A” should be on hold.
after finish “C” input will complete again they want talk each other .This
is the scenario.

Can anybody help to me how can I add this IVR in between those call….,
and how my asterisk will detect the DTMF input….

Best Regards,

Mahesh Katta

3 thoughts on - How Can I configure the between call oneside IVR

  • A should transfer C to a local channel that plays the IVR then returns the
    call to A.

    [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of mahesh katta
    Sent: Monday, January 16, 2012 9:56 AM

    Hi list,

    how we can configure between call add the IVR.
    My scenarios is
    “A” get the incomming call from “C”.In between them I need to one side IVR
    play for “C”, “C” enter the some DTMF inputs and “A” should be on hold.
    after finish “C” input will complete again they want talk each other .This
    is the scenario.

    Can anybody help to me how can I add this IVR in between those call…., and
    how my asterisk will detect the DTMF input….

    Best Regards,

    Mahesh Katta

  • I would do it something like this

    [ivrandreturn]

    Exten => s,1,playback(message)

    Exten => s,n,waitexten(5)

    Exten => 1,1,noop(stuff for press 1)

    Exten => 1,n,dial(SIP/A)

    Exten => 2,1,noop(stuff for press 2)

    Exten => 2,n,dial(SIP/A)

    In real life SIP/A would be something like SIP/${ARG1} where ARG1 is the
    extension for A.

    [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of mahesh katta
    Sent: Monday, January 16, 2012 10:21 AM
    IVR

    I was tried it but its not going.. with same
    Best Regards,

    Mahesh Katta

    A should transfer C to a local channel that plays the IVR then returns the
    call to A.

    [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of mahesh katta
    Sent: Monday, January 16, 2012 9:56 AM

    Hi list,

    how we can configure between call add the IVR.
    My scenarios is
    “A” get the incomming call from “C”.In between them I need to one side IVR
    play for “C”, “C” enter the some DTMF inputs and “A” should be on hold.
    after finish “C” input will complete again they want talk each other .This
    is the scenario.

    Can anybody help to me how can I add this IVR in between those call…., and
    how my asterisk will detect the DTMF input….

    Best Regards,

    Mahesh Katta