* You are viewing the archive for November 29th, 2011

SLA and polycom

Hello, every body

Anyone set up, the sla sharing line appearances, in asterisk, I’m setting,
tha but, don’t, work, I change the sla.conf, extensions.conf, and sip.cfg,
but don’t work fine.

Any one, could setup, tha?

Regards

Carlos Rojas

When dialing the number, I need to see it in the Cisco LCD Phone

Dear List;

I have internal Menu that I use it when doing outside call (it ask some questions, and then it ask to dial the number that need to call it), I can access this menu by dialing 9, but after the Background stay play the wave file, then whatever I dial (to select) and whatever the number that I dial it, I do not see it in the LCD of the IP Phone, it stays display on the IP Phone the 9 number (which is the first dialed number to access the Menu), how can I display the dialed numbers that I am dialing on the LCD, because I need to see what I dialed (at least to know I am dialing the right digits and to know what the number I am calling him now)!!

I am adding below the extensions.conf part that is related to this scenario:

exten => 9,1,Set(AgentCount=1)
exten => 9,2,Background(WhichCustomer)

exten => 1,1,Set(EnteredOption=1)
exten => 1,2,Goto(ExternalOnly,s,1)

exten => 2,1,Set(EnteredOption=2)
exten => 2,2,Set(CALLERID(pres)=allowed)
exten => 2,3,Set(CALLERID(num)=65631040)
exten => 2,4,Goto(ExternalOnly,s,1)

exten => i,1,Playback(pbx-invalid)
exten => i,2,Set(AgentCount=$[${AgentCount}+1])
exten => i,3,GotoIf($[${AgentCount} < 3]?ExternalAgent,9,2:4)
exten => i,4,Playback(vm-goodbye)
exten => i,5,Hangup()

exten => t,1,Set(AgentCount=$[${AgentCount}+1])
exten => t,2,GotoIf($[${AgentCount} < 3]?ExternalAgent,9,2:3)
exten => t,3,Playback(vm-goodbye)
exten => t,4,Hangup()
;

[ExternalOnly]

exten => s,1,Set(OutCount=1)
exten => s,2,Background(EnterTheNumber)

exten => i,1,Playback(pbx-invalid)
exten => i,2,Set(OutCount=$[${OutCount}+1])
exten => i,3,GotoIf($[${OutCount} < 3]?ExternalOnly,s,2:4)
exten => i,4,Playback(vm-goodbye)
exten => i,5,Hangup()

exten => t,1,Set(OutCount=$[${OutCount}+1])
exten => t,2,GotoIf($[${OutCount} < 3]?ExternalOnly,s,2:3)
exten => t,3,Playback(vm-goodbye)
exten => t,4,Hangup()

exten => _ZXXXXXXXX,1,MixMonitor(${CHANNEL}${EXTEN}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)}.wav)
exten => _ZXXXXXXXX,2,Dial(${PSTNTRUNK}/${EXTEN})
exten => _ZXXXXXXXX,3,Playback(vm-nobodyavail)
exten => _ZXXXXXXXX,4,Hangup()
exten => _ZXXXXXXXX,103,Congestion()
exten => _ZXXXXXXXX,104,Hangup()

Any help on how to be able to display at the Cisco IP Phone LCD what I am dialing during this scenario?

Regards
Bilal

SIM to E1 gateway, and SMS gateway

Hi All;

I need to use a gateway that converts from SIM to E1 to I can send and receive calls via the GSM, so did any one use a good gateway for this and reliable and stable and costly effective, so he can advise us to use it?

Also, it will be a separate product if we need also to use it for SMS (send and receive), also we need a reliable and constly effective product for this.

Thanks in advance.
Regards
Bilal

Does IEEE 801.2q include VLAN trunking?

Hello List,

I’m a little bit confused as I read about IEEE 801.2.q
So, my actual question is: Does a switch stating to support IEEE 801.2q
also supports VLAN trunking?

As I understand the standard, I suppose it does, but I’m not sure.

Can someone clarify this for me, please?
Thank you vermy much.

Best regards,
Ruben

app_mysql and asterisk 1.4

hello list

i have one question how to check if the app_mysql module is compiled and
loaded in my system if not how can i do in order to install it and load it
i use asterisk 1.4

thanks and regards