Its probably not a bug so dont apply this patch. No D-Channel means it cant sync up. It could be related to anything but the least likely is that its a bug in libpri or dahdi. Just go thru your configs, check and double check the cabling. On Tue, ..
My genconf_parameter is : # grep -v ^# genconf_parameters lc_countryfr context_linesremote group_lines1 bri_sig_stylebri echo_canoslec pri_termtype SPAN/*NT (I also tried various identations and syntax for pri_termtype line such as bri_termtype bu..
Running asterisk 126.96.36.199, and occasionally well have a call drop and the SIP retransmit error show up on the console.I actually think the retransmit error is just a symptom of something else, possibly centered around a timing issue. I tried res_timing_da..
1. Is there any manual entry about modprobes options relative to a given Dahdi driver (wctdm24xxp, for instance) ? 2. When loading a wctdm24xxp driver, is there any parameter to pass to modprobe to configure a span in NT/point to point mode ? 3. Af..
Dears; To patch libpri: I just place the patch file in the libpri source directory and then I run make and make install? Or I need to compile the dahdi and asterisk also? If the problem stayed, do I have to go for previous libpri version? Or for previ..
Anyone have recommendations for a gateway / ATA for business that can do
GroundStart? Preferably with an rj-21 – but okay if ..
Im having problems with audio coming to my asterisk PBX from eyebeam softphone running on Windows XP machine, it has a lot of Jitter. Ive taken a lot of tcpdumps from Asterisk machine and jitter comes only from softphones, audio comming and going..
Im using a two-years old installation script for the first time on a Squeeze (linux 2.6.32) platform. For an unknown reason (might be an obvious one), Dahdi cant be loaded anymore. 1. First of all, it seems /dev/dahdi content was previously (ie in Len..
All; My ISDN was working fine, and suddenly I start getting the below: sig_pri.c:985 pri_find_dchan: Span 1: No D-chanannel anyway! There is a Yellow Alarm, so what it could be the problem? My configuration as following: system.conf span=1,1,0,ccs,hdb3,yel..